
Forged DBB Valve with Double Block and Bleed, 1/2 to 8 inch, Pressure Classes 150 to 2500
The DBB valve pairs two ball shutoffs in the main bore with a needle bleed for the cavity between them, all within one forged body. Sizes span 1/2 to 8 inch and pressure classes run from 150 to 2500.
- Type
- double block and bleed valve (DBB)
- Design
- two ball shutoffs and a needle bleed valve in one body
- Ball type
- floating or trunnion
- Size
- 1/2 to 8 inch
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Valves of the double block and bleed type are used in oil and gas, power generation, chemical plants, refineries and petrochemical sites. Typical duties include instrument isolation for chemical injection and sampling, gauge connection isolation, and in-line process shutoff. A single body takes the place of two valves and a separate drain, so no extra pipework or drain connections are needed.
The body is one integral piece. Two ball shutoffs sit in the main bore, and a needle valve vents the cavity between them. Pressure-containing parts are fully forged in a die. The primary gasket is a Lip-Seal type, and a secondary emergency seal is always fitted for fire-safe performance. Bodies are either split or end-entry, although end entry is not offered across the whole range. The design keeps electrical continuity between the ball, stem and body.
Each block valve in the main bore is bidirectional and rated for full differential pressure at ambient and low temperatures. In the floating version the ball moves freely between its seals, and line pressure acting on the upstream face creates the seal. In the trunnion version the ball is fixed mechanically at its upper and lower ends, and seats loaded by springs seal against it. The bore is unobstructed, so pressure drop stays minimal.
Sizes run from 1/2 to 8 inch with pressure classes from 150 to 2500. Construction is covered by ASME B16.34, with EEMUA 182 where it applies, and by API 608, API 6D and ISO 17292. Inspection is to API 598 and marking is per MSS SP-25. Fugitive emission limits follow ISO 15848. Fire-safe testing references API 607 with API SPEC 6FA. The actuator pad conforms to ISO 5211. Socket-weld ends follow ASME B16.11, threaded ends are NPT per ASME B1.20.1, flanged ends meet ASME B16.5, and butt-weld ends are to ASME B16.25.
Compact construction with fewer leak points reduces mass, space and loads from weight and vibration. Each valve is designed to the specific order, and the range includes cryogenic and high-temperature versions with metal seats.
Technical specifications
| Type | double block and bleed valve (DBB) |
|---|---|
| Design | two ball shutoffs and a needle bleed valve in one body |
| Ball type | floating or trunnion |
| Size | 1/2 to 8 inch |
| Pressure classes | 150 to 2500 |
| Body | fully forged, split or end-entry |
| Design standards | ASME B16.34, EEMUA 182, ISO 17292, API 608, API 6D |
| Testing | API 598 |
| Marking | MSS SP-25 |
| Fugitive emissions | ISO 15848 |
| Fire safety | API 607, API SPEC 6FA |
| Mounting pad | ISO 5211 |
| Socket-weld ends | ASME B16.11 |
| Threaded ends (NPT), standard | ASME B1.20.1 |
| Flanged ends | ASME B16.5 |
| Butt-weld ends | ASME B16.25 |
Part numbers
Show all part numbers (132)
1-E333R, 1-E444R, 1-E555R, 1-E777R, 1-E888R, 1-EMMMR, 1-ENNNR, 1-EPPPR, 1-FQQQR, 1-E434R, 1-E545R, 1-E757R, 1-E878R, 1-EM8MR, 1-ENMNR, 1-EPNPR, 1-EQPQR, 1-E433X, 1-E533X, 1-E733X, 1-E833X, 1-EM33X, 3-E333R, 3-E444R, 3-E555R, 3-E777R, 3-E888R, 3-EMMMR, 3-ENNNR, 3-FPPPR, 3-FQQQR, 3-E434R, 3-E545R, 3-E757R, 3-E878R, 3-EM8MR, 3-ENMNR, 3-EPNPR, 3-FQPQR, 3-E433X, 3-E533X, 3-E733X, 3-E833X, 3-EM33X, 6-E333R, 6-E444R, 6-E555R, 6-E777R, 6-E888R, 6-EMMMR, 6-FNNNR, 6-FPPPR, 6-FQQQR, 6-E434R, 6-E545R, 6-E757R, 6-E878R, 6-EM8MR, 6-ENMNR, 6-FPNPR, 6-FQPQR, 6-E433X, 6-E533X, 6-E733X, 6-E833X, 6-EM33X, 90H E333R, 90H E444R, 90H E555R, 90H E777R, 90H E888R, 90H FMMMR, 90H FNNNR, 90H FPPPR, 90H FQQQR, 90H E434R, 90H E545R, 90H E757R, 90H E878R, 90H EM8MR, 90H FNMNR, 90H FPNPR, 90H FQPQR, 90H E433X, 90H E533X, 90H E733X, 90H E833X, 90H EM33X, 15H E333R, 15H E444R, 15H E555R, 15H E777R, 15H E888R, 15H FMMMR, 15H FNNNR, 15H FPPPR, 15H FQQQR, 15H E434R, 15H E545R, 15H E757R, 15H E878R, 15H EM8MR, 15H FNMNR, 15H FPNPR, 15H FQPQR, 15H E433X, 15H E533X, 15H E733X, 15H E833X, 15H EM33X, 25H E333R, 25H E444R, 25H E555R, 25H F777R, 25H F888R, 25H FMMMR, 25H FNNNR, 25H FPPPR, 25H FQQQR, 25H E434R, 25H E545R, 25H E757R, 25H F878R, 25H FM8MR, 25H FNMNR, 25H FPNPR, 25H FQPQR, 25H E433X, 25H E533X, 25H E733X, 25H E833X, 25H EM33X
Request a price and lead time
Forged DBB Valve with Double Block and Bleed, 1/2 to 8 inch, Pressure Classes 150 to 2500. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is a DBB valve used for?
It shuts off the line with two ball seals and lets the medium in the cavity between them vent through a needle valve, which isolates instruments, gauges and process sections.
Which ball design should be chosen?
In the floating design line pressure holds the ball against the seal, while the trunnion design fixes the ball at its upper and lower ends with spring-loaded seats. Both versions are bidirectional.
Which end connections are available?
Socket weld to ASME B16.11, NPT threads to ASME B1.20.1, flanged to ASME B16.5, and butt weld to ASME B16.25.
Similar equipment from other manufacturers






