International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

DM7000/DM8000 Three-Piece Full Port Ball Valve, NPS ½ to 2 with Direct-Mount Flange

The DM7000 (CF8M stainless steel body) and DM8000 (WCB carbon steel body) three-piece valves have a cast flange for direct actuator mounting and a 1/8 inch NPT side port. Sizes run from DN 15 to 50, with a maximum pressure of 1000 WOG and an operating range from -46 to 287 °C.

Type
three-piece full port ball valve
Sizes
NPS ½ to 2 / DN 15 to 50
Body material
CF8M stainless steel (DM7000), WCB carbon steel (DM8000), special alloys
Ball material
CF8M stainless steel

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The DM7000/DM8000 series is built on the established 7000/8000 three-piece ball valve design, but the flange for direct actuator mounting is cast into the body itself. Fewer separate parts mean a smaller overall envelope and less play between the ball and the actuator, which matters in control valve duty. Where the 7000/8000 models come with a locking handle, the DM versions leave the stem bare so that an actuator can be fitted straight on.

The extension of the mounting flange carries a 1/8 inch NPT threaded side port. Plant teams can use it to monitor fugitive emissions, detect and divert leaks, or hold a positive pressure seal. It also gives an emergency repair route, since sealant can be injected through a button head check valve.

A self-adjusting live-load gland uses Belleville washers to keep constant preload on the stem packing. This makes up for temperature changes and wear, so the valve stays bubble-tight under positive pressure as well as at low pressure or vacuum, with a long cycle life and little upkeep. Seat options are RPTFE, TFM, UHMWPE, Tek-Fil (carbon graphite with TFM) and 50/50 stainless steel filled PTFE.

The body is available in CF8M stainless steel for the DM7000 or WCB carbon steel for the DM8000, with special alloys on request. The ball is CF8M stainless steel and the stem is 316 stainless steel. End connections cover threaded NPT to ASME B1.20.1, socket weld to ASME B16.11 and butt weld to MSS SP-72 and ASME B16.25, each with an extended version, plus ASME Class 150 flanged ends. The design follows MSS SP110, and testing is carried out to API 598 and MSS SP72.

Options include V-shaped balls for control duty, cavity fillers, polished internals, vented balls, and general or oxygen cleaning. The valve is serviced in line, and the actuator can be removed safely while the line is still under full pressure. Typical sectors range from chemicals and petrochemicals to food, HVAC, industrial gases, marine, mining, oil and gas, pharmaceuticals, power, pulp and paper, sugar and ethanol, and water and wastewater.

Technical specifications

Typethree-piece full port ball valve
SizesNPS ½ to 2 / DN 15 to 50
Body materialCF8M stainless steel (DM7000), WCB carbon steel (DM8000), special alloys
Ball materialCF8M stainless steel
Stem material316 stainless steel
SeatsUHMWPE, RPTFE/TFM, 50/50 SS filled PTFE, Tek-Fil
Temperature-50 to 550 °F (-46 to 287 °C)
Maximum allowable operating pressure1000 WOG
Portfull
End connectionsNPT (ASME B1.20.1), socket weld (ASME B16.11), butt weld (MSS SP-72, ASME B16.25), extended versions, ASME Class 150 flanged
Control port1/8 inch NPT in the flange extension
Design standardMSS SP110
TestingAPI 598, MSS SP72

Part numbers

Show all part numbers (2)

DM7000, DM8000

Request a price and lead time

DM7000/DM8000 Three-Piece Full Port Ball Valve, NPS ½ to 2 with Direct-Mount Flange. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the DM7000 differ from the DM8000?

Only the body material. The DM7000 has a CF8M stainless steel body and the DM8000 a WCB carbon steel body. Both use a CF8M ball and a 316 stainless steel stem.

What is the 1/8 inch NPT side port used for?

It supports fugitive emission monitoring, leak detection and diversion, positive pressure sealing, and emergency sealant injection through a button head check valve.

In which sizes are the direct-mount valves supplied?

The DM7000 and DM8000 come in NPS ½ to 2 (DN 15 to 50), with the stem left bare for actuator fitting.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides