International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Two-Grade Cast Steel Gate Valves, Pressure Class 150, Sizes NPS 2 to 18

Two cast steel grades are offered for the body: A216 WCB carbon steel and A217 WC9 chrome-molybdenum steel. Ends are supplied as BW S40 butt weld or as raised face (RF) flanges.

Type
cast steel gate valves
Pressure class
Class 150
Sizes, inches
2, 2½, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18
Connection type
butt weld BW S40; raised face flanges (RF)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

These cast steel gate valves are rated to Class 150 and serve as isolation valves on pipelines in oil and gas, power generation, chemical and petrochemical plants, refineries and general industrial piping. When open, a gate valve passes the medium with minimal resistance, and when closed it shuts off the line.

The range covers NPS 2 to 18, and each size has its own flow coefficient Cv. Values run from 309 at the smallest size up to 28682 at the largest, so the lowest figure corresponds to the smallest flow area. Designers use these coefficients for hydraulic calculations of the line and for choosing the correct valve size.

Two body materials are offered. A216 WCB is a cast carbon steel for general use, while A217 WC9 belongs to the cast chrome-molybdenum steel group.

Pipe ends are either butt weld ends prepared for Schedule 40 pipe (BW S40) or raised face flanges (RF). Welded ends suit permanent lines that are never taken apart, whereas flanged ends suit assemblies that are dismantled from time to time. When ordering, state the size, connection type and body material. Each combination has its own standard part number, and drawings and 3D models are available for design work.

Technical specifications

Typecast steel gate valves
Pressure classClass 150
Sizes, inches2, 2½, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18
Connection typebutt weld BW S40; raised face flanges (RF)
Cv coefficient309, 500, 705, 1307, 2089, 3090, 5706, 8936, 13351, 16277, 21534, 28682
Body materialA216 WCB, A217 WC9

Part numbers

Show all part numbers (2)

A216WCB, A217WC9

Request a price and lead time

Two-Grade Cast Steel Gate Valves, Pressure Class 150, Sizes NPS 2 to 18. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which body materials are available for Class 150 gate valves?

Cast carbon steel A216 WCB and cast chrome-molybdenum steel A217 WC9.

How are the valves connected to the pipeline?

Through butt weld ends prepared for Schedule 40 pipe (BW S40), or through raised face flanges.

What flow coefficient range does the series cover?

The Cv coefficient runs from 309 to 28682 across the NPS 2 to 18 sizes.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides