International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Ti300+ handheld thermal imager, 76,800-pixel detector, LaserSharp focus, up to 650°C

Ti300+ is a one-handed imager for maintenance teams that need repeatable thermographic surveys of switchgear, motors, bearings and pipework. Laser-guided focusing locks on to the chosen target, and temperatures are read between -20 and 650°C.

Detector
76,800 pixels, 320 x 240
Waveband
7.5-14 μm
Spatial resolution (IFOV)
1.85 mRad, D:S 532:1
Measurement span
-20 to 650 °C

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Focus is where this camera earns its keep. LaserSharp uses a built-in laser rangefinder to find the target and set focus at a press of a button, so images stay sharp even when shooting through chain-link fencing that would fool a passive system. The distance appears on screen, which makes route-based inspections easy to repeat from the same spot. Manual focus remains available, down to 15 cm.

The uncooled detector carries 76,800 pixels (320 x 240) and works in the 7.5-14 μm long-wave band. Spatial resolution is 1.85 mRad with a distance-to-spot ratio of 532:1, and NETD is no worse than 0.075 °C at a 30 °C target. The error limit is ±2 °C or 2%, whichever is greater, at 25 °C nominal. Two builds exist, differing only in frame rate: 9 Hz or 60 Hz.

On the back sits a 3.5 inch touchscreen at 640 x 480. A 5 MP visible-light camera supports full-screen IR-Fusion blending and picture-in-picture. Files go to a removable 4 GB micro SD card, 4 GB of internal flash or a USB stick, and each image can carry up to 60 seconds of voice notes. Emissivity, reflected background and transmission corrections are set on the camera itself.

The IP54 housing has been tested to survive a 2-metre drop and has a mass of 1.04 kg including battery. Two field-swappable lithium-ion packs give 2-3 hours each and recharge in 2.5 hours; a mains adaptor for 100-240 V, 50/60 Hz is included. Operating range is -10 °C to 50 °C at 10% to 95% humidity, non-condensing, and the design complies with IEC 61010-1 and IEC 61326-1.

Technical specifications

Detector76,800 pixels, 320 x 240
Waveband7.5-14 μm
Spatial resolution (IFOV)1.85 mRad, D:S 532:1
Measurement span-20 to 650 °C
Thermal sensitivity (NETD)≤ 0.075 °C at 30 °C (75 mK)
Error limit±2 °C or 2% at 25 °C
Frame rate9 Hz or 60 Hz
FocusLaserSharp, manual; minimum 15 cm
Screen3.5 inch touch, 640 x 480
Visible camera5 MP
Storage4 GB micro SD, 4 GB internal, USB
Batteries2 packs, 2-3 h each, 2.5 h charge
Ingress protectionIP54 (IEC 60529)
Operating temperature-10 to 50 °C
Weight with battery1.04 kg

Request a price and lead time

Ti300+ handheld thermal imager, 76,800-pixel detector, LaserSharp focus, up to 650°C. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How do the 9 Hz and 60 Hz builds differ?

Only in frame rate. Detector size, the -20 to 650 °C span and every other figure are the same.

Will it focus through a mesh fence?

Yes. LaserSharp locks on to the target behind the mesh rather than the nearest object, and the measured distance is shown on screen.

Which file formats are supported?

Non-radiometric .bmp and .jpeg, or fully radiometric .is2. The analysis software also exports GIF, PNG and TIFF.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides