
Top-Hinge Metal Sectionalising Cabinets and Primary Pedestals for 15–35 kV, 200/600 A
All-welded steel, aluminium or stainless enclosures that house the junctions at sectionalising and tap points of underground medium-voltage networks. The 300 Series opens on a top hinge, while the 200 Series pedestal lifts off and carries its own ground sleeve.
- Type
- top-hinge cabinet (300 Series); lift-off pedestal (200 Series)
- Voltage
- 15–35 kV
- Current
- 200 A or 600 A
- Phases
- single and three-phase
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Security drives the design. Every seam is fully welded, so nothing can be pushed into the joints, and tamper-proof channels run along the inside seams. Shells come in 14- or 12-gauge mild steel, mild steel with a zinc-rich primer, aluminium or stainless steel, and the hinges and hardware are heavy-duty non-ferrous metal.
The enclosures are built to ANSI/IEEE C57.12.28 for pad-mounted equipment integrity, covering clause 4.1.7 on latching devices, the 4.3.2 pry test and the 4.3.4 probe test with 14 AWG solid copper wire. For outdoor duty they meet NEMA 3R: rain, sleet and snow are kept out with a small drain hole at the bottom, external ice will not damage the shell, and falling dirt is excluded while some airflow remains. The range is RUS listed.
On the 300 Series the lid swings up on stainless-steel hinges and is held by a wind stop, giving the jointer clear access to everything inside. It is secured by a stainless penta-head bolt with a padlock provision, and larger cabinets get two such bolts. A powder-coat finish in Munsell green 7GY 3.29/1.5 is standard, with light grey mounting bars that stay visible in poor weather; other colours are available on request.
Networks from 15 kV to 35 kV, single- or three-phase, at 200 A or 600 A are covered. Inside go 2-, 3- or 4-point junction modules, shipped loose or fitted at the factory, plus an optional ground bus, parking stands, a fault indicator viewing window and warning decals. Metal risers, ground sleeves and fibreglass bases complete the installation, and stainless lifting provisions plus ground nuts on the mounting bar and rear wall ease setting and earthing. The 200 Series pedestals such as CW214-18, CW218-18 and CW215-22 suit single-phase 200 A lines at 15 kV or 25 kV.
Technical specifications
| Type | top-hinge cabinet (300 Series); lift-off pedestal (200 Series) |
|---|---|
| Voltage | 15–35 kV |
| Current | 200 A or 600 A |
| Phases | single and three-phase |
| Material | 14- or 12-gauge mild steel, aluminium, stainless steel, mild steel with zinc-rich primer |
| Construction | fully welded |
| Compliance | ANSI/IEEE C57.12.28, NEMA 3R |
| Locking | stainless penta-head bolt, padlock provision |
| Hinges and hardware | stainless steel |
| Finish | powder coat, Munsell green 7GY 3.29/1.5 |
| Junction modules | 2-, 3- or 4-point |
| Example designations | CW326-18TH (R)-AL; CW214-18, CW218-18, CW215-22 |
Request a price and lead time
Top-Hinge Metal Sectionalising Cabinets and Primary Pedestals for 15–35 kV, 200/600 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which tamper tests does the enclosure pass?
It is built to ANSI/IEEE C57.12.28, including clause 4.1.7 on latching, the 4.3.2 pry test and the 4.3.4 probe test with 14 AWG wire.
Can the cabinet be supplied in a non-steel shell for corrosive sites?
Yes, aluminium and stainless-steel versions are offered alongside 14- or 12-gauge mild steel and mild steel with a zinc-rich primer.
Can the junctions arrive already fitted?
Yes, 2-, 3- and 4-point junction modules are available either shipped separately or pre-installed in the cabinet.
Similar equipment from other manufacturers






