International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

SM Fused Sectionaliser, Pad-Mount Deadfront, 5–27 kV, 200 A and 600 A Circuits

The SM is a low-profile pad-mount sectionaliser with fuses, housed in a deadfront enclosure. It protects and isolates critical 200 A and 600 A cable circuits in radial and loop layouts at voltages from 5 kV to 27 kV.

Type
fused sectionaliser, pad-mount, deadfront
Designation
SM
Voltage
5 kV to 27 kV
Circuit current
200 A / 600 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The SM is intended for medium-voltage cable networks where a critical 200 A or 600 A circuit must be protected by fuses and separated from the rest of the system at the same time. It serves radial and loop layouts and is set on a pad beside the cable routes. Its deadfront construction leaves no exposed live parts on the operating side, and the low profile makes it less conspicuous in built-up areas.

The enclosure is 12 ga steel all round, which gives it high mechanical strength. Hinges and fittings are 304 stainless steel. The construction uses white electrical grade fibreglass, which insulates electrically and makes the inside of the unit easier to see. The exterior finish is Munsell Green.

The unit is supplied for voltages from 5 kV to 27 kV, as a single-phase or three-phase version. The configuration is chosen to suit the network layout, whether radial or loop, and the circuit current of 200 A or 600 A.

A mimic diagram of the busbars is marked on the deadfront face and on the removable rear barriers in the fuse compartment, so operating staff can see which circuit is connected to which fuse. This reduces the risk of mistakes during switching and when replacing fuse links. The rear barriers come off separately, without dismantling the rest of the enclosure. The unit is intended for outdoor installation and is delivered fully assembled, with the design focused on personnel safety, ease of operation, versatility and a neat appearance.

Technical specifications

Typefused sectionaliser, pad-mount, deadfront
DesignationSM
Voltage5 kV to 27 kV
Circuit current200 A / 600 A
Phasessingle-phase, three-phase
Network layoutradial, loop
Enclosure12 ga steel
Insulationwhite electrical grade fibreglass
Hinges and fittings304 stainless steel
ColourMunsell Green
Mimic diagramon deadfront face and removable rear barriers
Installationoutdoor, supplied fully assembled

Part numbers

Show all part numbers (1)

SM

Request a price and lead time

SM Fused Sectionaliser, Pad-Mount Deadfront, 5–27 kV, 200 A and 600 A Circuits. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What voltage range is the SM made for?

The SM is made for voltages from 5 kV to 27 kV, in single-phase and three-phase versions.

Which circuits is the SM intended for?

It is intended for critical 200 A and 600 A cable circuits in radial and loop layouts, where fuse protection and sectionalising are required.

What materials is the enclosure made from?

The enclosure is 12 ga steel, the hinges and fittings are 304 stainless steel, and the insulation is white electrical grade fibreglass.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides