International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

HubMO SS substation motor operator, solid state control, 20000 in-lb torque

HubMO SS is a self-contained electric motor operator for substation switches, with a solid state control unit. It develops a torque of 20000 in-lb and completes an operation in 4 to 6 or 8 to 10 seconds.

Model
HubMO SS
Type
self-contained electric motor operator for disconnectors
Application
substation switches
Working torque
20000 in-lb

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The HubMO SS operator is fitted to high-voltage disconnectors and other substation switching devices that are turned through a vertical operating pipe. It is a fully self-contained unit, with the electric motor and control unit assembled in one product, and it can be adapted to different types of substation switch.

A motor operator is chosen where the switch is operated electrically rather than by hand, either locally or remotely. The movement and timing of each operation stay the same from one switching to the next, and personnel do not need to stand beside the equipment while it moves.

The electric motor provides a working torque of 20000 in-lb. The operating speed is selected when ordering, at either 4 to 6 seconds or 8 to 10 seconds per switching. The control unit is solid state, with no relay or contactor logic.

The position of the vertical operating pipe is set in steps of 5%, which makes it quick to define the stop points for the closed and open positions during commissioning. A display on the control unit shows the main states of the operator, which speeds up setup and fault finding. A programmable operating delay helps prevent damage and unsafe conditions while the disconnector opens or closes, and it protects the controller.

For outdoor installation in cold climates there is an option with two 100 W heaters for temperatures down to -40 °C. Dimensions in the documentation are given for the operator in its mounted state. When ordering, state the type and model of the disconnector, the required torque and operating speed, the supply voltage and whether heating is needed. After mounting, the end positions are adjusted from the control unit display.

Technical specifications

ModelHubMO SS
Typeself-contained electric motor operator for disconnectors
Applicationsubstation switches
Working torque20000 in-lb
Operating time4 to 6 s or 8 to 10 s
Control unitsolid state, with status display
Vertical operating pipe (VOP) position setting5% steps
Operating delayprogrammable
Heater (option)2 × 100 W
Minimum temperature with heater-40 °C

Request a price and lead time

HubMO SS substation motor operator, solid state control, 20000 in-lb torque. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What torque does the operator develop?

A working torque of 20000 in-lb, with an operating speed of 4 to 6 or 8 to 10 seconds.

How are the end positions of the disconnector set?

The vertical operating pipe position is adjusted from the control unit in steps of 5%, and the state is shown on the display.

Can the operator work in severe cold?

Yes. An optional pair of 100 W heaters is available for temperatures down to -40 °C.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides