International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

FlexMO Motor Operator for Switches, Solid State Controls, Battery Backup, 20000 in-lb

The FlexMO is a motor operator with a solid state control system for substation, transmission and distribution switches. It delivers up to 20000 in-lb of torque and turns the shaft through 90° in 0.5 s, and a battery backup keeps it working when the main supply is lost.

Type
Solid state motor operator
Application
Substation, transmission and distribution switches
Torque
Up to 20000 in-lb
Angle of rotation
90°

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The operator is fitted to disconnectors and load break switches in substations, trunk lines and distribution networks, so switching can be carried out remotely or locally. The design adapts to different switch types, and the drive transmits rotation to the disconnector mechanism through a vertical operating pipe (VOP).

Torque reaches 20000 in-lb and the shaft turns through 90° in 0.5 s, with the sequence controlled by a solid state controller. A battery backup keeps the operator able to switch the device should the main supply fail.

An integrated position sensor reports the real-time position of the vertical operating pipe, so the fully open and fully closed end points can be set quickly and simply during commissioning. The rotation speed can be adjusted, including while a switching operation is under way.

At the end of an opening or closing stroke the operator can be configured to damp the momentum of the device, which reduces oscillation of the disconnector blades after they stop. The unit is ready to connect to SCADA systems, with the communication module attached to the standard controller through a plug connector. This simplifies the inclusion of disconnectors in a substation or distribution telemetry system.

When selecting an operator, the switch type, the required torque and the angle of the operating pipe must be considered. The values of up to 20000 in-lb and 90° in 0.5 s apply to the FlexMO with solid state controls and battery backup. Mounting dimensions are specified by the manufacturer for the installed condition and should be checked on site, in the cabinet or on the switch structure.

Technical specifications

TypeSolid state motor operator
ApplicationSubstation, transmission and distribution switches
TorqueUp to 20000 in-lb
Angle of rotation90°
Rotation time0.5 s
Backup powerBattery
Position sensorIntegrated, real-time VOP position
SpeedAdjustable, including during operation
Inertia dampingConfigurable at end of cycle
CommunicationSCADA ready, plug connector to controller

Part numbers

Show all part numbers (1)

FlexMO

Request a price and lead time

FlexMO Motor Operator for Switches, Solid State Controls, Battery Backup, 20000 in-lb. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the operator still work if the main supply is lost?

Yes, it has a battery backup that keeps the switch operable.

How are the open and closed positions set?

The built-in position sensor on the vertical operating pipe lets both end points be set quickly.

Can the operator be connected to telemetry?

Yes, the SCADA communication module attaches to the standard controller through a plug connector.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides