International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

XPRD Super-Large Pressure Relief Valve with Directional Outlet, 12600 SCFM

The XPRD mechanical relief valve vents excess pressure from a transformer or tap changer tank and reseals itself once pressure falls. Its built-in directional outlet, 8 inch in diameter, carries hot oil and gas away through piping, and flow reaches 12600 SCFM.

Type
mechanical pressure relief valve with directional outlet
Set pressure
4–20 psi
Flow
12600 SCFM at 15 PSI (10 PSI setting)
Screen outlet diameter
8 inch

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Units of this size go on large power transformers and on liquid-filled apparatus such as on-load tap changers, where maximum flow is needed during an emergency pressure rise. The unit suits both new transformers and replacements of older valves, since it uses the same mounting hole layout as the LPRD and industry standards, so it fits an existing flange. According to published data, flow is 50 % higher than that of the LPRD.

The valve has a spring-loaded double design, opening quickly when pressure rises above the set point and closing again once it drops. Set points can be chosen between 4 psi and 20 psi. Flow is 12600 standard cubic feet per minute at 15 PSI for a valve set to 10 PSI. The directional screen with an 8 inch outlet is standard and turns through 360 degrees, with a turning radius of 323.3 mm. Piping, flanges and animal guards attach to the outlet, so hot oil and gas are led to a safe place rather than onto neighbouring equipment and people.

Alarm contacts are latching or momentary, single-pole or double-pole Form C, high-voltage DC types, or gold-plated for low-current circuits. The standard contact is rated 10 A at 125/250 VAC, 0.5 A at 125 VDC and 0.25 A at 250 VDC on a non-inductive load. The High DC version (SPDT only) is rated 10 A at 125 VDC, and the gold-plated version handles 0.1 A at 125 VAC. Dielectric strength is 2000 VAC at 50/60 Hz for one minute. The contact housing is cast aluminium with powder coating, rated IP54. The state of the valve is shown by a semaphore flag in nylon or painted aluminium.

The base ring and flange are cast aluminium, with a chromate-coated ring and a polyester powder-coated flange finished to ASA 70, and C5-High is available to order. The valve, cover, screen, studs and fixings are stainless steel, and the spring is ASTM A229 wire. Gaskets are nitrile as standard, or Viton or fluorosilicone. Materials and coatings withstand 1000 hours of salt spray to ASTM B117 without notable loss of strength. Gas bleed systems and stainless steel housings and piping are available as options.

Attachment to the tank uses six evenly spaced slots of 0.63 inches on a circle of 8.375 inch, with a recommended tank opening of 171.5 mm (6.75 inch). Ambient temperature runs from -40 to 80 °C at a tank liquid temperature of 30 °C.

Technical specifications

Typemechanical pressure relief valve with directional outlet
Set pressure4–20 psi
Flow12600 SCFM at 15 PSI (10 PSI setting)
Screen outlet diameter8 inch
Screen rotation360°, turning radius 323.3 mm
Tank connection6 slots 0.63 inches, circle 8.375 inch
Recommended tank opening171.5 mm (6.75 inch)
Contact rating10 A at 125/250 VAC; 0.5 A at 125 VDC; 0.25 A at 250 VDC
High DC (SPDT)10 A at 125 VDC
Gold-plated contacts0.1 A at 125 VAC
Dielectric strength2000 VAC, 50/60 Hz, 1 min
Contact housingcast aluminium, IP54
Flange and ringcast aluminium
Valve, cover, fixingsstainless steel
Gasketsnitrile (standard) / Viton / fluorosilicone
Salt spray1000 h to ASTM B117
Ambient temperature-40 to 80 °C

Part numbers

Show all part numbers (1)

XPRD00-00222177

Request a price and lead time

XPRD Super-Large Pressure Relief Valve with Directional Outlet, 12600 SCFM. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can an XPRD replace an LPRD without modifying the tank?

Yes. The XPRD uses the same mounting hole layout as the LPRD, six slots of 0.63 inches on a circle of 8.375 inch.

What is the flow rate of the valve?

12600 SCFM at 15 PSI for a valve set to 10 PSI.

How is the oil discharged when the valve operates?

Piping is connected to the 8 inch directional outlet, and the screen turns through 360 degrees to direct the flow to the required side.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides