International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

STB000 Self-Regenerating Silica Gel Transformer Breather, 1 and 2 kg

The STB000 breather protects oil-filled transformers and tap changer conservators from moisture entering, and regenerates its silica gel using built-in heaters. Regeneration starts at a relative humidity threshold, a PPM threshold or at timed intervals.

Type
breather with self-regenerating silica gel
Silica gel mass
1 kg or 2 kg
Flask
glass
Regeneration trigger
%RH, PPM or time

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

As a transformer runs, its oil expands and contracts, and the unit breathes air in from the atmosphere. Moisture in that air degrades the oil, paper and insulation, speeds up ageing and, over time, leads to unplanned repairs. The STB000 fits on the breather connection of the main tank conservator or of an on-load tap changer, so that only dry air enters the tank. The design is universal and suits both new transformers and the replacement of conventional dryers on operating equipment.

The dryer is filled with silica gel in a glass flask. Built-in heaters dry the silica gel inside the unit, so it does not need changing and no site visit is needed for servicing. Regeneration is triggered by a user-set threshold of relative humidity (%RH), a moisture content in PPM, or set time intervals. A pressure sensor and a breathing-cycle recognition algorithm make sure moisture released during regeneration is expelled outside. From the breathing pattern the unit can tell operation on a tap changer from operation on the main tank.

Two models are produced, with 1 kg or 2 kg of silica gel, and the size is chosen by the transformer oil volume. For connection to monitoring systems there is a 4–20 mA analogue current output, an RS-485 Modbus interface and alarm relay outputs. A built-in data logger, a test button and a local USB port support on-site checks, settings and reading of the status through the configuration software.

The enclosure is rated IP65 and corrosion protected, with a C5-High coating or stainless steel, and an offshore version is available on request. Operating temperature is -40 to 70 °C in the standard version and -60 to 70 °C in the polar version. Data from the dryer feeds condition-based maintenance programmes and helps track the condition of a transformer fleet.

Technical specifications

Typebreather with self-regenerating silica gel
Silica gel mass1 kg or 2 kg
Flaskglass
Regeneration trigger%RH, PPM or time
Outputs4–20 mA; RS-485 MODBUS; alarm relay
Diagnosticsdata logger, test button, USB port
Ingress protectionIP65
CoatingC5-High or stainless steel
Operating temperature-40 to 70 °C; polar version -60 to 70 °C
Applicationmain tank conservator, tap changer conservator

Part numbers

Show all part numbers (6)

STB111112324, STB111122221, STB211111214, STB121211221, STB221111214, STB000-00314804521

Request a price and lead time

STB000 Self-Regenerating Silica Gel Transformer Breather, 1 and 2 kg. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the silica gel need replacing?

No. Built-in heaters regenerate the silica gel automatically when a %RH, PPM or time threshold is reached.

How is the choice between 1 kg and 2 kg made?

By the oil volume of the transformer or conservator on which the breather is fitted.

Can the breather status go to a monitoring system?

Yes, through the 4–20 mA output, the RS-485 Modbus interface or the alarm relay outputs.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides