
165/167 and 47080 Side-Mount Bimetal Thermometer with Control Contacts
The 165/167 and 47080 thermometers mount on the side wall of a transformer tank to display temperature, hold the maximum reading and control cooling or alarms. The 165/167 series has up to three contacts and the 47080 model up to two.
- Type
- bimetal side-mount thermometer with contacts
- Scale range
- 0–150 °C
- Accuracy
- ±2 % of scale range
- Scale diameter
- 4.5″ (114.3 mm); 47080 3.9″
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 165/167 and 47080 bimetal thermometers suit locations where the measuring point, a pocket or well, sits on the side wall of the unit and the scale needs to be easy to read. The instrument shows the current oil or winding temperature of the transformer, carries a maximum pointer with a reset knob, and has built-in contacts for cooling control and alarms. The thermometer sits in a pocket, so it can be replaced without draining oil or breaking the tank seal.
The 165/167 series provides up to three contacts for control and alarm duties, while the 47080 offers up to two SPST or SPDT contacts. The contacts can switch motors of up to 3/4 HP directly. The rating is 5 A at 250 VAC and 0.3 A at 110 VDC on an inductive load with L/R = 10 ms. Setpoint accuracy is ±2 % of scale range, repeatability is ±1.250 % of range, and the differential is about 5 °C. Connection is by terminal block, and insulation withstands 2000 VAC for one minute.
The series scale is 4.5″ (114.3 mm) in diameter, while the 47080 is specified at 3.9″. The standard scale range is 0–150 °C, with an indication error of ±2 % of full scale. A damped sensing element gives smooth pointer movement. The lens is clear polycarbonate with UV stabilisation, resistant to scratching and yellowing.
The case is cast aluminium with an ANSI #70 thermosetting powder coating, and a C5-High coating is available to order. The lens and gasket are clamped by a bezel, forming a tight joint that protects the mechanism from the environment. Vented models stop moisture collecting under the lens, while the sealed 165/167 models are intended for submerged equipment such as transformers in underground chambers. The thermometer is fixed from the side, with the threaded fitting at the centre of the rear wall. Tank connection options are 7/8″-14 UNF-2A, G 3/4″, or a 22 mm O-ring seal. The probe is stainless steel with a diameter of 12.16 to 12.26 mm, and the operating temperature runs from -40 to 70 °C. Manufacture is certified to ISO 9001.
Technical specifications
| Type | bimetal side-mount thermometer with contacts |
|---|---|
| Scale range | 0–150 °C |
| Accuracy | ±2 % of scale range |
| Scale diameter | 4.5″ (114.3 mm); 47080 3.9″ |
| Number of contacts | 165/167 up to 3; 47080 up to 2 |
| Contact type | SPST / SPDT |
| Contact rating | 5 A at 250 VAC; 0.3 A at 110 VDC (L/R = 10 ms) |
| Set point accuracy | ±2 % of scale range |
| Set point repeatability | ±1.250 % of scale range |
| Differential | about 5 °C |
| Dielectric strength | 2000 VAC, 1 min |
| Connection | terminal block |
| Tank connection | 7/8″-14 UNF-2A; G 3/4″; 22 mm O-ring |
| Probe diameter | 12.16–12.26 mm |
| Case | cast aluminium, ANSI #70 powder coating or C5-High |
| Lens | polycarbonate with UV stabilisation |
| Operating temperature | -40 to 70 °C |
Part numbers
Show all part numbers (10)
47080, 47080-2, 47080-3, 47080-4, 47080-4-1, 47080-3-1, 165-231-01, 165-50-19, 167-245-01, 167-224-03
Request a price and lead time
165/167 and 47080 Side-Mount Bimetal Thermometer with Control Contacts. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How many contacts can the thermometer have?
The 165/167 series has up to three contacts, and the 47080 model up to two SPST or SPDT contacts.
Can the contacts switch a cooling fan motor directly?
Yes. The contacts can switch motors of up to 3/4 HP directly, with a rating of 5 A at 250 VAC.
Which tank connections are available?
A 7/8″-14 UNF-2A thread, a G 3/4″ thread, or a 22 mm O-ring seal.
Similar equipment from other manufacturers






