International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

120 Bourdon tube thermometer, 6-inch dial, up to 4 contacts

A Bourdon tube thermometer for transformer tanks, with a 6-inch (152.4 mm) dial, a resettable maximum pointer and up to four contacts for cooling control and alarms. The C5-High housing is rated IP65.

Measuring element
Bourdon tube
Dial diameter
6 inches (152.4 mm)
Standard scales
0–120, 0–160, 0–180, 20–180, 0–200, 0–220, 0–250 °C
Indication accuracy
±2% of span

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 120 is fitted directly to the transformer tank where the measuring point is on the side and easy to see. It shows oil temperature, is used for direct simulation of winding temperature on power transformers, and its contacts switch cooling and alarm circuits. It suits new transformers and the replacement of instruments on those in service, including in harsh outdoor and industrial conditions.

The sensing element is a Bourdon tube. The large 6-inch (152.4 mm) dial carries a maximum-temperature pointer that is reset after inspection. Standard scales are 0–120, 0–160, 0–180, 20–180, 0–200, 0–220 and 0–250 °C, and other ranges and markings are made to order. Indication error and contact operating error are both ±2% of span.

Up to four instantaneous SPST or SPDT contacts can be fitted, with the configuration chosen for the application, the connector and the cable type. Ratings are 10 A at 125, 250 and 480 V AC, and on DC 1.5 A at 48 V, 1/2 A at 125 V and 1/4 A at 250 V on a resistive load. Dielectric strength is 1500 V AC at 50/60 Hz for 60 seconds, with 2000 V AC as an option. The bezel is removable for changing the set points, and an analogue output is available as an option.

The die-cast aluminium case has ANSI #70 powder coating of C5-High class and an IP65 rating. The bezel is stainless steel, the gasket is neoprene, and the lens is impact-resistant UV-stabilised polycarbonate or, optionally, toughened glass. The sensor is brass, and its length and thread are made to order. The ambient operating range is from -40 °C to 70 °C. The sensor connects to the well through a removable brass fitting with a 7/8-14 UNF-2A thread, so the thermometer can be replaced without lowering the oil level or breaking the tank seal. Electrical connection is through a terminal box, a quick-release MIL connector, an ANSI connector or the maker's own connector.

Technical specifications

Measuring elementBourdon tube
Dial diameter6 inches (152.4 mm)
Standard scales0–120, 0–160, 0–180, 20–180, 0–200, 0–220, 0–250 °C
Indication accuracy±2% of span
Contact operating accuracy±2% of span
Number of contactsup to 4
Contact typeinstantaneous, SPST or SPDT
Contact rating, AC10 A at 125, 250, 480 V AC
Contact rating, DC1.5 A at 48 V, 1/2 A at 125 V, 1/4 A at 250 V (resistive)
Dielectric strength1500 V AC, 50/60 Hz, 60 s; optionally 2000 V AC
Well connection7/8-14 UNF-2A, removable brass fitting
Mountingthreaded at centre of back wall
Housingdie-cast aluminium, ANSI #70 powder coating, C5-High
Protection ratingIP65
Bezelremovable, stainless steel
Lenspolycarbonate or toughened glass (option)
Operating temperature-40 °C to 70 °C

Part numbers

Show all part numbers (25)

120-001-01_CS-60446, 120-006-01_CS-53070, 120-001-01_CS-48585, 120-004-01_CS-46794, 120-004-01, 120-002-01_CS-42855, 120-004-02_CS-14639, 120-009-01_CS-40746, 120-009-01_CS-51992, 120-005-03_CS-40875, 120-001-01_CS-11563, 120-005-03_CS-43553, 120-001-01_CS-61012, 120-011-01_CS-34576, 120-005-01_CS-43202, 120-004-02_CS-49555, 120-001-01_CS-36048, 120-005-03, 120-002-01_CS-47256, 120-004-02_CS-31045, 120-001-01, 120-011-01_CS-50624, 120-009-01_CS-61611, 120-005-01_CS-34771, 120-009-01_CS-41560

Request a price and lead time

120 Bourdon tube thermometer, 6-inch dial, up to 4 contacts. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the 120 thermometer be replaced without draining the oil?

Yes, when it is fitted in a well. The thermometer is removed without lowering the oil level and without breaking the tank seal.

How many contacts does the 120 have?

Up to four SPST or SPDT contacts rated 10 A at 480 V AC. The configuration is chosen for the application and the type of connector.

Is the unit suitable for outdoor installation?

Yes, the housing is rated IP65 with C5-High coating, and the operating temperature runs from -40 °C to 70 °C.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides