
045 Oil Level Indicator with Gear Drive for Class 1 Div 2 Hazardous Areas
A mechanical oil level indicator with a gear-driven float for the main tank, conservator or tap changer compartment of a transformer. It is UL listed for Class 1 Div 2 hazardous areas and has up to three built-in SPDT contacts and an optional 0 to 1 mA or 4 to 20 mA analogue output.
- Type
- mechanical level indicator with magnetic coupling
- Float mechanism
- gear
- Mounting
- flange, several sizes
- Dial diameter
- 5.5 inch
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 045 indicator shows the liquid level continuously in the main tank, conservator, tap changer compartment or another vessel where the level is critical. The model is designed for hazardous areas at transformer installations. It suits new transformers as well as retrofits of existing units, where limit levels need signalling and the level has to reach SCADA.
The gear-driven float mechanism gives greater pointer travel relative to float travel, so a change in level on the 5.5 inch dial is easier to follow. The pointer is coupled to the float by a magnetic coupling, so there is no leakage through the case, and the dial can be replaced on site without breaking the tank seal. The flange mounting is available in several sizes, and the flange type and float mechanism are chosen to suit the tank.
The case is die-cast aluminium with a thermoset powder coating, and the bezel is stainless steel. Other parts are made from corrosion-resistant materials for harsh environments. The lens is polycarbonate stabilised against UV as standard and does not yellow with age, though plain or toughened glass can be ordered instead. The float rod is brass, copper-plated steel or aluminium, and the float is Nitrophyl, steel, cork or a homogeneous acrylate plastic.
For alarm signalling of low and high levels, up to three SPDT contacts are fitted, rated 10 A at 125, 250 and 480 V AC, with trip points set to the required levels. The version with a 0 to 1 mA or 4 to 20 mA analogue output sends the level to a remote monitoring system, and its electronics run from 24 V DC or 120/240 V AC. Electrical connection can be made through quick-connect plugs, a terminal box or conduit entry. Dial markings are standard industry legends or follow a custom layout.
Technical specifications
| Type | mechanical level indicator with magnetic coupling |
|---|---|
| Float mechanism | gear |
| Mounting | flange, several sizes |
| Dial diameter | 5.5 inch |
| Case | die-cast aluminium |
| Bezel | stainless steel |
| Lens | UV-stabilised polycarbonate (standard), plain or toughened glass |
| Float rod | brass, copper-plated steel or aluminium |
| Float | Nitrophyl, steel, cork or homogeneous acrylate plastic |
| Contacts | up to 3, SPDT |
| Contact rating | 10 A at 125, 250 and 480 V AC |
| Analogue output | 0 to 1 mA or 4 to 20 mA (optional) |
| Electronics supply | 24 V DC, 120/240 V AC |
| Hazardous areas | UL listed, Class 1 Div 2 |
| Connection | quick-connect plug, terminal box, conduit entry |
Part numbers
Show all part numbers (10)
045-60E_CS-36009, 045-008-01, 045-014-01_CS-44580, 045-60F, 045-60-1, 045-005-01, 045-60A, 045-016-01, 045-012-01, 045-006-01
Request a price and lead time
045 Oil Level Indicator with Gear Drive for Class 1 Div 2 Hazardous Areas. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the 045 be installed in a hazardous area?
Yes. The 045 is UL listed for Class 1 Div 2 hazardous areas.
What does the gear drive change for reading the level?
The gear mechanism increases pointer travel relative to float travel, so a change in level is easier to see on the 5.5 inch dial.
What signals can the indicator provide?
Up to three SPDT contacts rated 10 A at 125, 250 and 480 V AC for limit levels, and optionally a 0 to 1 mA or 4 to 20 mA analogue output.
Similar equipment from other manufacturers






