International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

039 Remote Oil Level Indicator with Electronic Module for Transformer Tanks

A local mechanical level gauge combined with an electronic remote module for continuous monitoring of oil in a main tank, conservator or tap changer compartment. The module sends a 0 to 1 mA or 4 to 20 mA signal to SCADA and has two limit relays.

Local gauge mounting
flange
Local gauge dial diameter
5.5 inch (139.7 mm)
Remote indicator dial diameter
7.12 inch (180.9 mm)
Electronic module size
152.4 × 241.3 mm

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 039 indicator suits main tanks and conservators of transformers, tap changer compartments, high-voltage utility units and industrial equipment. The local gauge is a magnetically coupled unit bolted to the equipment by a flange, while the remote indicator sits somewhere safer and more convenient, where the level can be read without going near the tank.

The local gauge sends a variable resistance signal to the remote module over a four-core cable of up to 22.9 m (75 ft). The module offers offset adjustment and separate gain adjustments for the upper and lower parts of the scale, which match its readings to the local gauge. Its output goes to SCADA or a transformer monitor, as a current signal of 0 to 1 mA into a load of up to 10 kΩ, or as 4 to 20 mA into a load of up to 500 ohm. Tracking accuracy across the range is within ±5 % of full scale.

The module has two dry SPDT relays, each with a set point for the upper and lower level that can be set independently, and set point repeatability of ±3 % of full scale. Contacts are rated 10 A at 120/240 V AC, 10 A at 30 V DC, or 1/3 hp at 120 V AC. The local gauge's contacts can drive alarms or auxiliary equipment. Circuit terminals withstand 2000 V AC for 60 seconds.

Power is 100 to 240 V AC at 50/60 Hz or 125 to 250 V DC, with 48 to 65 V DC as an option. The permitted supply range is 80 to 110 % of rated, to EN60255-1. Emissions meet EN55011 class A, and immunity meets EN61000-6-5 for substations. The module measures 152.4 × 241.3 mm and is available for indoor and outdoor mounting in standard or enlarged sizes, with outdoor versions supplied in a NEMA 3R enclosure.

The case is die-cast aluminium with a thermoset powder coating to ANSI #70, optionally C5-High, and the lens is UV-stabilised polycarbonate that does not yellow with time. The float is cork or Nitrophyl. The local dial is 5.5 inch (139.7 mm) across and is magnetically attached to the flange. Operating temperature is -20 to +72 °C, or -40 to +72 °C with a heater, which runs from a 120 or 240 V AC 50/60 Hz supply. The remote indicator tolerates 10 to 90 % humidity as standard and 10 to 100 % in a NEMA 3R enclosure. It withstands 10 g shock in the horizontal plane and vibration at 60 to 120 Hz at 0.004 inch displacement.

Technical specifications

Local gauge mountingflange
Local gauge dial diameter5.5 inch (139.7 mm)
Remote indicator dial diameter7.12 inch (180.9 mm)
Electronic module size152.4 × 241.3 mm
Cable to modulefour-core, up to 22.9 m (75 ft)
SCADA output0 to 1 mA (0 to 10 kΩ) or 4 to 20 mA (0 to 500 ohm)
Tracking accuracy±5 % of full scale
Relays2 dry SPDT
Set point repeatability±3 % of full scale
Contact rating10 A at 120/240 V AC; 10 A at 30 V DC; 1/3 hp at 120 V AC
Power supply100 to 240 V AC 50/60 Hz; 125 to 250 V DC; option 48 to 65 V DC
Dielectric strength2000 V AC, 60 s
EMCEN55011 class A, EN61000-6-5
Casedie-cast aluminium, ANSI #70, C5-High option
LensUV-stabilised polycarbonate
Floatcork or Nitrophyl
Operating temperature-20 to +72 °C; with heater -40 to +72 °C
Remote indicator humidity10 to 90 %, NEMA 3R 10 to 100 %
Shock and vibration10 g; 60 to 120 Hz, 0.004 inch

Part numbers

Show all part numbers (7)

039-010-01_CS-40471, 039-013-01_CS-45291, LLG039-00392854, LLG039-00397366, 039-014-01_CS-44022, 039-018-01_CS-49096, LLG039-00320001

Request a price and lead time

039 Remote Oil Level Indicator with Electronic Module for Transformer Tanks. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How far can the remote module be from the local gauge?

The module is connected to the local gauge by a four-core cable of up to 22.9 m (75 ft).

How is the module matched to the local gauge reading?

The module has offset adjustment and separate gain adjustments for the upper and lower parts of the scale. These are used to match the remote reading to the local gauge.

Does the indicator work at low temperatures?

The standard range is -20 to +72 °C, and an optional heater extends it to -40 to +72 °C.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides