
Lorch TF-Pro 300 TIG inverter with integrated cold wire feeder, 5-300 A
Lorch TF-Pro 300 is a TIG inverter with a four-roller cold wire feeder built into the housing. According to Lorch, automatic filler feed lets the operator weld up to three times faster with a clean weld appearance, including on aluminium and stainless steel.
- Brand
- Lorch
- Country of manufacture
- Germany
- Model
- TF-Pro 300
- Series
- T-Pro / TF-Pro
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TF-Pro 300 belongs to the Lorch T-Pro and TF-Pro line but is distinguished from the standard T-Pro 300 by an integrated cold wire feeder for TIG work. The filler wire is fed into the weld pool automatically, so the welder can hold the torch in one hand and still achieve an even bead along the full length of the seam. Lorch quotes a speed increase of up to three times compared with feeding filler by hand.
The feed is driven by a four-roller motor with a carefully matched gearbox. Cold wire feed is controlled from a removable panel that can be placed close to the welding point. The machine is offered as a DC system with cold wire feed and as an AC/DC system with cold wire feed, both in a mobile compact body. The torch can be cooled by gas or water.
The power source is an inverter with digital software control. The TIG range runs from 5 to 300 A with stepless adjustment. On DC the machine gives 230 A at 100% duty cycle and 270 A at 60%, with 45% at maximum current. On AC it gives 200 A at 100% and 230 A at 60%, with 30% at maximum current. Switching from DC to AC is needed for welding aluminium. Pulse and fast pulse up to 2 kHz are built in, which helps on thin sheet. MMA mode covers 10 to 200 A with electrodes from 1.5 to 5.0 mm.
Arc ignition is contactless high frequency, so the tungsten electrode does not touch the workpiece, which leaves no tungsten inclusions in the weld and wears the electrode less. ContacTIG is available for areas where high-frequency interference is not acceptable. Intelligent Torch Control recognises whether a standard torch or a digital Lorch i-Torch with Powermaster control is connected. An interval-spot function reduces distortion on thin sheet. The ControlPro panel follows the 3 steps to weld concept, with a digital current and voltage display, illuminated symbols, cycle control and Tiptronic memory for 100 tasks. Hand and foot remotes from Lorch connect to the remote socket in plug and play mode.
Power comes from a three-phase 400 V supply at 50/60 Hz, with a mains tolerance of plus or minus 15%, a 16 A fuse and a CEE 16 plug. The unit measures 880 x 400 x 755 mm and weighs 67 kg. It meets EN 60974-01, with IP23S protection, insulation class F and CE and S markings.
Technical specifications
| Brand | Lorch |
|---|---|
| Country of manufacture | Germany |
| Model | TF-Pro 300 |
| Series | T-Pro / TF-Pro |
| Type | TIG inverter with integrated cold wire feeder |
| Configuration | DC system with cold wire feed; AC/DC system with cold wire feed |
| Cooling | gas or water |
| TIG range | 5-300 A, stepless |
| MMA range | 10-200 A |
| MMA electrode diameter | 1.5-5.0 mm |
| TIG DC, duty cycle 100% / 60% | 230 A / 270 A |
| TIG DC, duty cycle at max. current | 45% |
| TIG AC, duty cycle 100% / 60% | 200 A / 230 A |
| TIG AC, duty cycle at max. current | 30% |
| Pulse | up to 2 kHz |
| Wire feed | built in, four-roller, removable control panel |
| Control | ControlPro, Tiptronic memory for 100 tasks |
| Ignition | contactless HF; ContacTIG option |
| Mains voltage | 3~ 400 V, 50/60 Hz |
| Mains tolerance | +15% / -15% |
| Mains fuse | 16 A |
| Plug | CEE 16 |
| Dimensions (L x W x H) | 880x400x755 mm |
| Weight | 67 kg |
| Standard | EN 60974-01 |
| Protection rating | IP23S (EN 60529) |
| Insulation class | F |
| Markings | CE, S |
Request a price and lead time
Lorch TF-Pro 300 TIG inverter with integrated cold wire feeder, 5-300 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the TF-Pro 300 differ from the T-Pro 300?
The TF-Pro 300 has a built-in four-roller cold wire feeder with a removable control panel. The current range is the same, 5-300 A.
What duty cycle does the TF-Pro 300 have?
On DC it gives 270 A at 60% and 230 A at 100% duty cycle. On AC it gives 230 A at 60% and 200 A at 100%.
What supply does the unit need?
A three-phase 400 V supply at 50/60 Hz, with a tolerance of plus or minus 15%, a 16 A fuse and a CEE 16 plug.
Similar equipment from other manufacturers






