International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kjellberg InFocus 500 TIG torch, 500 A at 100% duty cycle, 20 mm diameter, liquid cooled

Kjellberg InFocus 500 is a compact high-output TIG torch for welding in areas with restricted access. At 20 mm in diameter it carries up to 500 A, and the manufacturer names robotic welding of gas cylinders and similar parts as its main use.

Brand
Kjellberg
Country of manufacture
Germany
Model
InFocus 500
Type
high-output TIG torch

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The InFocus 500 has a compact body and very intensive cooling of the electrode, so the arc stays stable even where the seam is hard to reach. The torch is only 20 mm in diameter, the length up to the hose pack can be reduced to 200 mm, and the welding current reaches 500 A. At 100% duty cycle the torch still carries 500 A.

Electrodes screw into the body and are cooled through a patented circuit. This allows an electrode to be swapped quickly without grinding or setting up, and it gives precise work along the robot tool centre point (TCP) together with stable arc behaviour. The cooling circuit is closed, with KJELLFROST as the coolant. According to the manufacturer, the main use is robotic welding of cylinders and other parts with similar restricted access.

Compared with conventional TIG, the manufacturer cites a better ratio of penetration depth to bead width, a narrower heat-affected zone and less distortion, along with higher welding speed and the possibility to save helium. The arc is highly concentrated. Weld samples made with InFocus are shown on high-alloy steel 1.4301 at thicknesses of 3.0, 6.0 and 8.0 mm.

Shielding gases include argon, helium, mixtures and ArH, and the arc is ignited at high voltage. The clamping diameter is 23 mm, and the hose pack is axial with a current-water or DIX connection, supplied in 4 m or 8 m lengths or to order. Without the hose pack the torch weighs 260 g, and with a 4 m current-water pack it weighs 5.0 kg.

The torch works with the FocusTIG 500 easy and FocusTIG 550 power sources, covering a current range of 5-550 A, a voltage of 10.2-32 V and pulsed operation from 0.025 Hz to 15 kHz on a 3 x 400 V + N + PE supply. The FocusTIG 550 has a pallet-mounted base and a cooling module, while the FocusTIG 550 easy has DIX connectors and is prepared for cold wire. Cooling unit C3 is offered in several versions. For automation Kjellberg supplies analogue, digital or bus control interfaces to suit the customer, sensors for torch guidance and height control, and USB parameter software. There are torch holders for robots and gantries with cold-wire feeders, hot and oscillating wire feeders, gas nozzles made by additive manufacturing, and process imaging cameras. The manufacturer also offers welding task analysis, selection of special electrodes, trial welds and metallography.

Technical specifications

BrandKjellberg
Country of manufactureGermany
ModelInFocus 500
Typehigh-output TIG torch
Max. welding current500 A
Current at 100% duty cycle500 A
Shielding gasesAr, He, mixtures, ArH
Ignitionhigh-voltage
Torch coolingKJELLFROST coolant
Clamping diameterØ 23 mm
Hose pack typeaxial
Hose pack connectioncurrent-water or DIX
Hose pack length4 m, 8 m, on request
Weight without hose pack260 g
Weight with hose pack (current-water, 4 m)5.0 kg
Compatible power sourcesFocusTIG 500 easy, FocusTIG 550
Power source current5-550 A DC
Welding voltage10.2-32 V
Pulsed mode0.025 Hz-15 kHz
Open circuit voltage79 V
Mains3 x 400 V + N + PE (-25% to +20%), 50/60 Hz
Slow fuse3 x 32 A
Maximum connected power22.2 kVA
Protection class of the power sourceIP 23
Dimensions and weight, FocusTIG 550930 x 460 x 950 mm, 134 kg
Dimensions and weight, FocusTIG 500 easy780 x 375 x 625 mm, 86.8 kg
Cooling unitCooling unit C3

Request a price and lead time

Kjellberg InFocus 500 TIG torch, 500 A at 100% duty cycle, 20 mm diameter, liquid cooled. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What current does the InFocus 500 carry during continuous welding?

The maximum current is 500 A, and the torch carries the same 500 A at 100% duty cycle.

Which parts is the InFocus 500 suited to?

Parts with restricted access, above all robotic welding of gas cylinders. The torch is 20 mm in diameter, and the length up to the hose pack can be reduced to 200 mm.

Which power sources does the torch work with?

The FocusTIG 500 easy and FocusTIG 550, with a current range of 5-550 A. Cooling is liquid, through a KJELLFROST coolant unit, Cooling unit C3.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides