International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Lorch RF-06 robot wire feeder, four rollers, under 7 kg

The Lorch RF-06 is a compact, lightweight wire feeder for fitting to a welding robot. It works with both standard robots and hollow-arm robots, and with gas-cooled or water-cooled torches.

Brand
Lorch
Country of manufacture
Germany
Model
RF-06
Type
wire feeder for welding robot

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The RF-06 sits apart from the manual feeders in the Lorch range, because it is built specifically for robotic welding. It is mounted on the robot beside the torch, so the wire travels a short path from the rollers to the contact tip. The manufacturer highlights three qualities: compactness, low mass and precise feeding.

The mass is below 7 kg. For the robot this brings a direct benefit: less load on the upper axes, more payload margin for the torch, and faster movements without losing path accuracy.

Two robot types are covered. On a standard robot the hose package runs outside the arm, whereas on a hollow-arm robot it passes through the axes. For the second set-up the size of the feeder on the axis is especially critical, and the compact housing of the RF-06 removes that constraint.

The drive has four rollers in a precision arrangement. Two pairs guide the wire evenly and without slipping, which matters for arc stability during automatic operation. The feed plate, which carries the rollers and sets the wire path, is made from fibreglass-reinforced plastic, a material that is lighter than metal while keeping its stiffness.

The feeder works with both gas-cooled and water-cooled torches. Gas cooling suits moderate currents and a simpler hose assembly, while water cooling is the choice for long seams and heavy duty cycles on the robot. To specify a kit, confirm the robot type, standard or hollow-arm, the torch cooling, the wire material and diameter, and the Lorch power source the robot will work with.

Technical specifications

BrandLorch
Country of manufactureGermany
ModelRF-06
Typewire feeder for welding robot
Weightunder 7 kg
Wire feedfour-roller precision
Feed plate materialfibreglass-reinforced plastic
Coolinggas or water
Robot typesstandard and hollow-arm

Request a price and lead time

Lorch RF-06 robot wire feeder, four rollers, under 7 kg. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which robots can the Lorch RF-06 be fitted to?

Standard robots and hollow-arm robots, where the hose package runs through the axes.

How much does the RF-06 weigh?

Under 7 kg, which reduces the load on the upper axes of the robot.

Does the RF-06 work with water-cooled torches?

Yes, the feeder works with both gas-cooled and water-cooled torches.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides