International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber KTB 240W MIG/MAG welding torch, liquid-cooled, 300 A

The Kühtreiber KTB 240W is a liquid-cooled MIG/MAG welding torch for wire from 0.8 to 1.2 mm. The maker rates it at 300 A in CO₂ and 270 A in a CO₂+Ar mixture, both at a 100% duty cycle, which suits long continuous semi-automatic welding on the shop floor.

Brand
Kühtreiber
Type
MIG/MAG torch
Welding process
MIG/MAG
Cooling
liquid

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The KTB 240W is a liquid-cooled MIG/MAG welding torch from Kühtreiber, designed for welding wire between 0.8 and 1.2 mm in diameter. The maker quotes a maximum recommended load of 300 A when shielding with CO₂ and 270 A with a CO₂+Ar mixture. Both figures apply at a 100% duty cycle, so the torch can carry its rated current for long periods without a break, which suits extended seams and repeat production runs.

Liquid circulates through the neck and the handle to carry heat away, so the torch has to be connected to a welder or wire feeder equipped with a liquid cooling unit. The hose pack houses a gas hose, a set of water hoses, a power cable, a control cable and a wire guide liner. The water lines carry their own protection, and the water fittings are capped in colour, one red and one blue.

On the machine side the torch ends in a EURO connector made from a EURO tail piece, a union nut, a tail piece cover, a sealing ring and a liner nut. It therefore fits any equipment with a standard EURO socket. The KTB MIG handle with its control button attaches to the hose pack through a hinge, and a protective spring sits next to it. A hook for hanging the torch is offered as an optional extra.

The hose pack comes in three lengths: 3 m (part number 05220518), 4 m (05220519) and 5 m (05220520). Power cables, gas and water hoses, control cables and wire guide liners are sold separately as spare parts for each length, and the same applies to the neck, handle and button. A worn component can be swapped on its own, so the whole torch does not have to be replaced.

The KTB 240W is intended for semi-automatic gas-shielded welding in production, where the torch runs at high current for long periods. For lower currents or machines without a cooling unit, Kühtreiber offers air-cooled KTB torches within the same range.

Technical specifications

BrandKühtreiber
TypeMIG/MAG torch
Welding processMIG/MAG
Coolingliquid
Recommended maximum load, CO₂300 A (100% duty cycle)
Recommended maximum load, CO₂+Ar mixture270 A (100% duty cycle)
Welding wire diameter0.8–1.2 mm
Hose pack length3 m, 4 m, 5 m
ConnectionEURO connector
Country of manufactureCzech Republic

Part numbers

Show all part numbers (3)

05220518 (3 m), 05220519 (4 m), 05220520 (5 m)

Request a price and lead time

Kühtreiber KTB 240W MIG/MAG welding torch, liquid-cooled, 300 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What current can the Kühtreiber KTB 240W carry?

The maker gives a recommended maximum load of 300 A in CO₂ and 270 A in a CO₂+Ar mixture, both at a 100% duty cycle.

Which wire diameters does the KTB 240W take?

It is designed for welding wire from 0.8 to 1.2 mm in diameter.

Does the KTB 240W need a liquid cooling unit?

Yes. The torch is liquid-cooled, so the welder or wire feeder must include a liquid cooling unit. It connects through a EURO connector.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides