
Kühtreiber KIT 5-2 Push-Pull intermediate wire feeder for PUSH-PULL systems
The Kühtreiber KIT 5-2 Push-Pull is a compact two-roll feeder for PUSH-PULL systems, used when the welding torch needs to be extended by several metres. It weighs 5.5 kg and covers welding currents from 30 to 700 A.
- Brand
- Kühtreiber
- Type
- MIG/MAG wire feeder
- Power supply 50/60 Hz
- 24 V
- Slow-blow fuse
- 10 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Kühtreiber KIT 5-2 Push-Pull is designed for PUSH-PULL wire feed systems. It is used in workplaces where the welding torch must be extended by several metres from the power source. The unit is a two-roll feeder with a push-pull drive, so wire is pushed and pulled along a longer hose pack.
The feeder covers welding currents from 30 to 700 A and feeds wire at speeds from 0.5 to 20 m/min. Steel, stainless steel and aluminium wire are accepted, along with flux-cored wire, so one unit can serve carbon steel, stainless and aluminium work with the right power source and torch.
It runs from a 24 V, 50/60 Hz supply with a 10 A slow-blow fuse. The IP 21 rating means it is meant for workshops and covered areas rather than open rain. Dimensions are 140 × 190 × 200 mm and the weight is 5.5 kg.
Its small size and low weight make the unit easy to carry around a site together with the torch, and it can be placed close to the welding point. The part number is 50035. For greater feed power and for torches with liquid cooling, the range includes the four-roll KIT 5-4 W Push-Pull.
The KIT 5-2 Push-Pull suits workshops and installation work where the welding point is far from the power source, large structures, and soft wire fed over a long run.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Type | MIG/MAG wire feeder |
| Power supply 50/60 Hz | 24 V |
| Slow-blow fuse | 10 A |
| Welding current range | 30 – 700 A |
| Wire feed rolls | 2 |
| Wire feed speed | 0.5 – 20 m/min |
| Wire material | steel, stainless steel, aluminium, flux-cored wire |
| Protection rating | IP 21 |
| Dimensions | 140 × 190 × 200 mm |
| Weight | 5.5 kg |
| Application | PUSH-PULL systems |
| Country of manufacture | Czech Republic |
Part numbers
Show all part numbers (1)
50035
Request a price and lead time
Kühtreiber KIT 5-2 Push-Pull intermediate wire feeder for PUSH-PULL systems. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the KIT 5-2 Push-Pull used for?
PUSH-PULL systems, where the welding torch must be extended by several metres.
How many rolls does it have, and what is its speed range?
Two rolls, with wire feed speed from 0.5 to 20 m/min.
What are its dimensions and weight?
140 × 190 × 200 mm and 5.5 kg.
Similar equipment from other manufacturers






