International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber KIT 4-4 all-metal wire feeder for spools up to 32 kg, 30–700 A

The Kühtreiber KIT 4-4 is an all-metal four-roll wire feeder that takes spools of up to 32 kg. It has an independent 24, 110 or 230 V supply and covers welding currents from 30 to 700 A, and it can be fitted with powerful welding current switches.

Brand
Kühtreiber
Type
MIG/MAG wire feeder
Power supply 50/60 Hz
24/110/230 V
Slow-blow fuse
10/1.5/0.7 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Kühtreiber KIT 4-4 is an all-metal wire feeder designed for wire spools of up to 32 kg, which suits high-volume jobs with heavy wire consumption. The feeder has an independent power supply that runs at 24, 110 or 230 V, so it does not rely on the supply of the welder it is connected to. The maker describes the construction as sturdy and suited to demanding operation.

The feeder covers welding currents from 30 to 700 A and feeds wire at speeds from 0.5 to 20 m/min with a four-roll drive. Steel, stainless steel and aluminium wire are accepted, along with flux-cored wire, so one unit can serve carbon steel, stainless and aluminium work with the right power source and torch.

The mains supply is 24/110/230 V at 50/60 Hz, protected by slow-blow fuses of 10, 1.5 and 0.7 A respectively. The IP 21 enclosure is intended for workshop and covered use rather than open rain.

The feeder can be fitted with powerful welding current switches. Fitted with these, it can be used with power sources that keep permanent voltage on their input terminals. Dimensions are 556 × 445 × 665 mm and the weight is 21 kg. Two versions are offered: STANDARD (part number 50022) and PROCESSOR (part number 50731).

The KIT 4-4 suits high-consumption production, work with several power sources including those with permanent input voltage, and demanding operation where a sturdy frame is needed. Because a spool can weigh up to 32 kg, it is best set on a trolley or stand beside the work, so that spool changes do not involve lifting it high.

Technical specifications

BrandKühtreiber
TypeMIG/MAG wire feeder
Power supply 50/60 Hz24/110/230 V
Slow-blow fuse10/1.5/0.7 A
Welding current range30 – 700 A
Wire feed rolls4
Wire feed speed0.5 – 20 m/min
Wire materialsteel, stainless steel, aluminium, flux-cored wire
Protection ratingIP 21
Dimensions556 × 445 × 665 mm
Weight21 kg
Bodyall-metal
Wire spoolup to 32 kg
Optionpowerful welding current switches
Country of manufactureCzech Republic

Part numbers

Show all part numbers (2)

50022 (STANDARD), 50731 (PROCESSOR)

Request a price and lead time

Kühtreiber KIT 4-4 all-metal wire feeder for spools up to 32 kg, 30–700 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What spool size does the Kühtreiber KIT 4-4 take?

Wire spools of up to 32 kg.

What supply voltages does it run on?

Independent 24, 110 or 230 V supplies at 50/60 Hz, with slow-blow fuses of 10, 1.5 and 0.7 A respectively.

Can the KIT 4-4 work with power sources that keep voltage on their input terminals?

Yes, if the feeder is fitted with the powerful welding current switches the maker offers.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides