International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Kühtreiber KIT 3-2 W / 3-4 W all-metal wire feeder with built-in liquid cooling

The Kühtreiber KIT 3-2 W / 3-4 W is an all-metal wire feeder with powerful liquid cooling for the torch built into the unit. It covers 30–700 A, feeds wire at 0.5 to 20 m/min from a 48 V supply and weighs 34 kg.

Brand
Kühtreiber
Type
MIG/MAG wire feeder
Power supply 50/60 Hz
48 V
Slow-blow fuse
10 A

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Kühtreiber KIT 3-2 W / 3-4 W differs from the other KIT feeders in that the liquid cooling for the torch is built into its all-metal body. The maker describes the cooling as powerful and the construction as sturdy, intended for demanding operation. Because the cooling is built in, no separate cooling unit beside the power source is needed.

The feeder covers welding currents from 30 to 700 A and feeds wire at speeds from 0.5 to 20 m/min, using two or four rolls. Steel, stainless steel and aluminium wire are accepted, as is flux-cored wire, so one unit can serve carbon steel, stainless and aluminium work with the right power source and torch.

It runs from a 48 V supply at 50/60 Hz and is protected by a 10 A slow-blow fuse. The enclosure has an IP 21 rating, so the feeder is meant for workshops and covered areas rather than open rain. Dimensions are 556 × 445 × 665 mm and the weight is 34 kg, which is heavier than any other feeder in this range.

The 3-2 and 3-4 designations refer to two or four feed rolls. Two versions exist, both in the STANDARD configuration: 3-2 W STANDARD (part number 50039) and 3-4 W STANDARD (part number 50034).

The KIT 3-2 W / 3-4 W suits production where welding is done at high current over long arc times and the power source has no cooling unit of its own. Given its 34 kg weight, plan its position in advance so it can stay where it is set up.

Technical specifications

BrandKühtreiber
TypeMIG/MAG wire feeder
Power supply 50/60 Hz48 V
Slow-blow fuse10 A
Welding current range30 – 700 A
Wire feed rolls2 / 4
Wire feed speed0.5 – 20 m/min
Wire materialsteel, stainless steel, aluminium, flux-cored wire
Protection ratingIP 21
Dimensions556 × 445 × 665 mm
Weight34 kg
Bodyall-metal
Torch coolingliquid, built in
Country of manufactureCzech Republic

Part numbers

Show all part numbers (2)

50039 (3-2 W STANDARD), 50034 (3-4 W STANDARD)

Request a price and lead time

Kühtreiber KIT 3-2 W / 3-4 W all-metal wire feeder with built-in liquid cooling. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the Kühtreiber KIT 3-2 W / 3-4 W need a separate cooling unit?

No. The liquid cooling for the torch is built into the feeder.

What supply voltage does it use?

48 V at 50/60 Hz, protected by a 10 A slow-blow fuse.

What are the dimensions and weight?

556 × 445 × 665 mm and 34 kg.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides