
Weldolet® integrally reinforced butt weld olet, 1/8 to 24 NPS
A full-bore, butt-welded take-off can be made on the header itself with a Weldolet®. Its profile keeps stress concentration at the opening low and carries reinforcement within the fitting, for outlets from 1/8 NPS to 24 NPS.
- Size range
- 1/8 NPS – 24 NPS
- Wall / schedule
- STD, XS, XXS, S160, 5S, 10S
- Outlet type
- butt weld
- Design
- ASME B31.1, ASME B31.3, ASME Section III, MSS SP-97
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Of the olet range from this manufacturer, the Weldolet® covers the widest span of sizes, from 1/8 NPS to 24 NPS, and acts as the parent shape for the Sockolet® and Thredolet®, which differ only at the outlet. It is the usual choice where a branch must be butt welded and a reducing tee would be too large, too heavy or too costly.
The base is contoured to the header's outside diameter and thickened around the opening. According to the manufacturer, the geometry is worked out to minimise stress concentration and to give integral reinforcement, and the reinforcement can be produced to suit a project's own requirements. The outlet end is bevelled to ASME B16.25, while the face against the header is prepared to MSS SP-97.
Wall thickness is matched to the branch line, from standard weight through XS and XXS up to schedule 160, plus the light stainless schedules. On the code side the range satisfies ASME Section III, ASME B31.1 and ASME B31.3, together with MSS SP-97. Fittings are marked to MSS SP-25 for traceability.
Typical users are oil and gas, power generation, chemical, refining, petrochemical and general industrial plants. To quote, we need header size and wall, branch size and wall, and material. Dimensional tables and 3D CAD models are available from the manufacturer.
Technical specifications
| Size range | 1/8 NPS – 24 NPS |
|---|---|
| Wall / schedule | STD, XS, XXS, S160, 5S, 10S |
| Outlet type | butt weld |
| Design | ASME B31.1, ASME B31.3, ASME Section III, MSS SP-97 |
| Marking | MSS SP-25 |
| Face to pipe | MSS SP-97 |
| Weld bevel | ASME B16.25 |
Request a price and lead time
Weldolet® integrally reinforced butt weld olet, 1/8 to 24 NPS. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which wall thicknesses can be supplied?
STD, XS and XXS up to S160, plus stainless schedules 5S and 10S.
To what standard is the weld end prepared?
The outlet bevel follows ASME B16.25, and the face against the header MSS SP-97.
Can the reinforcement be made to a project specification?
Yes, the manufacturer produces reinforcement to the buyer's requirements, so include them with the enquiry.
Similar equipment from other manufacturers






