International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Nozzelet Insert Branch Outlet with Weld-End or Flanged Branch, 1/8 to 6 NPS

A branch fitting that sits inside a hole cut in the header pipe or vessel shell and is welded in place. Its base is shaped to the bore of the run pipe, and the branch end comes either bevelled for welding or with a flange.

Type
insert-pattern welded branch outlet
Branch end
bevelled weld end; flanged
Size range
1/8 NPS up to 6 NPS
Schedule / class
5S, 10S, STD, XS, XXS, S160; 300, 3000, 6000, 9000

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Taking a small branch off a header or vessel without a reinforcing pad is what the Nozzelet is for. It is an insert-pattern outlet: the fitting drops into a hole in the run pipe or shell, and its lower end is contoured to the bore so it sits flush with the inside wall instead of projecting into the flow. The branch side is supplied either with a bevelled end for welding to the branch pipe or with an integral flange for a bolted joint.

Design is carried out to ASME B31.1, ASME B31.3, ASME Section III and MSS SP-97, with inspection, testing and the face-to-pipe interface also governed by MSS SP-97. Fittings are marked in line with MSS SP-25. Weld ends are prepared to ASME B16.25, socket-weld ends to ASME B1.20.1, and the manufacturer lists ASME B16.5 against screwed (NPT) ends.

Sizes start at 1/8 NPS and go up to 6 NPS. Wall thickness covers light stainless schedules 5S and 10S, then STD, XS, XXS and S160, with pressure classes 300, 3000, 6000 and 9000 also listed. That spread lets one fitting type serve thin-wall stainless lines as well as high-pressure carbon steel systems.

Typical duties are instrument tappings, drains, vents and small-bore branches on piping in oil and gas, power generation, chemical and petrochemical plants, refineries and general industrial process lines. Inclusion of ASME Section III among the design codes means the outlet can be specified for systems engineered to that section.

Technical specifications

Typeinsert-pattern welded branch outlet
Branch endbevelled weld end; flanged
Size range1/8 NPS up to 6 NPS
Schedule / class5S, 10S, STD, XS, XXS, S160; 300, 3000, 6000, 9000
Design codesASME B31.1, ASME B31.3, ASME Section III, MSS SP-97
Inspection and testingMSS SP-97
MarkingMSS SP-25
Face to pipeMSS SP-97
Weld endsASME B16.25
Socket-weld endsASME B1.20.1
Screwed ends (NPT)ASME B16.5

Request a price and lead time

Nozzelet Insert Branch Outlet with Weld-End or Flanged Branch, 1/8 to 6 NPS. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What sizes are available?

From 1/8 NPS up to 6 NPS, in schedules 5S, 10S, STD, XS, XXS and S160 and classes 300, 3000, 6000 and 9000.

How does an insert outlet differ from a set-on fitting?

It sits inside a hole in the run pipe wall, and its base is contoured to the inside diameter of the header.

Which codes govern its design?

ASME B31.1, ASME B31.3, ASME Section III and MSS SP-97, with marking to MSS SP-25.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides