International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Nipolet® one-piece forged olet with integral nipple, NPT or socket-weld end, 1/8 to 6 NPS

A single forging that is welded onto the header and finishes in a short nipple, so an isolation valve, drain or vent can be fitted directly to the branch. It is intended for Extra Strong and Double Extra Strong pipework.

Type
forged olet with integral nipple
Sizes
1/8 NPS - 6 NPS
Length
3 1/2 in - 6 1/2 in
Schedules
STD, XS, XXS, S160, 5S, 10S

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The outlet end comes in two forms: a male NPT thread or a plain end for socket welding. Nipple lengths run from 3 1/2 in to 6 1/2 in, and the size range starts at 1/8 NPS and goes up to 6 NPS. Schedule coverage takes in STD, XS, XXS, S160, 5S and 10S, with pressure classes 3000, 6000, 9000 and 300.

On the job the fitting stands in for a weld-on boss plus a separate length of pipe nipple. The base is welded to the run pipe, and the free end then receives an isolation valve, a drain line or a vent connection. Because base and nipple are forged as one part, the branch has one joint fewer, which is welcome on heavy-wall Extra Strong and Double Extra Strong lines.

Design references are ASME B31.1 and B31.3 for power and process piping, ASME Section III, and MSS SP-97. Socket ends are machined to ASME B16.11, NPT threads are cut to ASME B1.20.1, and a butt-weld bevel, where requested, follows ASME B16.25. The face that sits against the pipe is prepared to MSS SP-97, and every piece carries marking in line with MSS SP-25.

These outlets turn up across oil and gas, chemical, refining and power generation plants, wherever a header needs plenty of small-bore take-offs. Dimensions for each header and branch combination are tabulated in the manufacturer's catalogue. When sending an enquiry, give the header size, the branch size, the schedule or class and the outlet end you need.

Technical specifications

Typeforged olet with integral nipple
Sizes1/8 NPS - 6 NPS
Length3 1/2 in - 6 1/2 in
SchedulesSTD, XS, XXS, S160, 5S, 10S
Classes3000, 6000, 9000, 300
Outlet endmale NPT thread or socket weld
DesignASME B31.1, ASME B31.3, ASME Section III, MSS SP-97
MarkingMSS SP-25
Face to pipeMSS SP-97
Socket weld endASME B16.11
NPT threadASME B1.20.1
Butt-weld bevelASME B16.25

Request a price and lead time

Nipolet® one-piece forged olet with integral nipple, NPT or socket-weld end, 1/8 to 6 NPS. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What sizes and nipple lengths are covered?

From 1/8 NPS up to 6 NPS, with nipple lengths between 3 1/2 in and 6 1/2 in.

Which outlet ends can be specified?

A male NPT thread cut to ASME B1.20.1, or a socket-weld end to ASME B16.11.

Which design codes apply?

ASME B31.1, ASME B31.3, ASME Section III and MSS SP-97, with marking per MSS SP-25.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides