
Thredolet® forged olet with female thread outlet, 1/8 to 6 NPS, class 3000 to 9000
For a screwed take-off from a welded header, the Thredolet® is welded over a hole in the run and gives a female-threaded outlet. It shares its body form with the Weldolet® and suits outlets from 1/8 NPS up to 6 NPS.
- Outlet size
- 1/8 NPS – 6 NPS
- Class
- 3000, 6000, 9000, 300
- Outlet type
- female thread
- Design
- ASME B31.1, ASME B31.3, ASME Section III, MSS SP-97
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Instrument tappings, vents, drains and small bypass lines are the usual reasons to fit this olet. Rather than cutting the header and inserting a tee, the fitter bores the run pipe, welds the contoured base of the fitting over the hole and screws the nipple, gauge or valve into the outlet.
Its body follows the standard Weldolet® configuration, so the weld base and reinforcement are the same; only the outlet differs, carrying a female pipe thread in place of a bevelled butt-weld end. The pipe-side face is finished to MSS SP-97, and ASME B16.11 is also quoted among the applicable end finishes.
The manufacturer designs the range to MSS SP-97 together with the piping codes ASME B31.1 (power piping), ASME B31.3 (process piping) and ASME Section III for nuclear plant components. Marking to MSS SP-25 identifies each piece. Typical sectors are oil and gas, power generation, chemical, refining, petrochemical and general industrial piping.
The specification table lists ratings of 9000, 6000, 3000 and 300, whereas the descriptive text mentions 3000# and 6000# only, so it is worth confirming the class against the line before ordering. Outlet sizes run from 1/8 NPS to 6 NPS. An enquiry should state header size, outlet size, class and material; dimensional tables and 3D CAD models are published by the manufacturer.
Technical specifications
| Outlet size | 1/8 NPS – 6 NPS |
|---|---|
| Class | 3000, 6000, 9000, 300 |
| Outlet type | female thread |
| Design | ASME B31.1, ASME B31.3, ASME Section III, MSS SP-97 |
| Marking | MSS SP-25 |
| Face to pipe | MSS SP-97 |
| End finish | ASME B16.11 |
| Base body | Weldolet® |
Request a price and lead time
Thredolet® forged olet with female thread outlet, 1/8 to 6 NPS, class 3000 to 9000. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the Thredolet® differ from a Weldolet®?
The body and weld base are the same; the outlet carries a female pipe thread instead of a butt-weld bevel.
Which ratings appear in the specification?
Four classes (300, 3000, 6000, 9000) are listed, covering outlet sizes from 1/8 NPS up to 6 NPS.
Which codes does the design satisfy?
MSS SP-97 plus ASME Section III, ASME B31.1 and ASME B31.3, with marking to MSS SP-25.
Similar equipment from other manufacturers






