
SteamForm 84000 Series Steam Conditioning Valve, Cv to 5800, 650 °C Rated
A single-body valve that drops steam pressure and brings down its temperature by water injection, used on turbine bypass, boiler extraction and process letdown duties. Seat diameters run from 50 mm to 600 mm and pressure classes go as high as ASME Class 4500.
- Duty
- steam pressure reduction and desuperheating
- Body type
- globe, angle, forged, Z pattern
- Trim size
- 3 to 24 inches (80 to 600 mm)
- Pipe size
- 3 to 48 inches (80 to 1200 mm)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Spray water enters through a patented injection system, and it must be supplied at least 150 psi (11.5 bar) above the outlet steam pressure for proper atomisation. Steam velocity is best kept at 76-91 m/s; the temperature sensor goes no closer than 10 m downstream and the pressure sensor 5 pipe diameters after the valve and any elbows.
The main duties are steam turbine bypass, auxiliary and process steam conditioning, boiler extraction to process, desuperheating and steam line temperature control. Users are found in power generation, refining, petrochemicals and chemicals, pulp and paper, and food. Dumping steam to a condenser can generate noise in excess of 110 dBA, which is why low-noise trim matters on this service.
The Lo-dB trim can be single or multi-stage, flow-to-close or flow-to-open, optionally with a diffuser and V-Log energy management trim, and thermally compensated designs are available for high temperature. Plugs seal with a metal or graphite ring, with pilot balancing as an option. The characteristic is linear or equal percentage, turndown reaches 50:1, and shut-off is Class V.
Bodies are offered in globe and angle patterns, forged versions of both and an offset Z body, with bolted or pressure seal bonnets. Trim sizes are 3 to 24 inches (80 to 600 mm) for pipe from 3 to 48 inches (80 to 1200 mm), and rated Cv reaches 5800. Ratings extend to ASME Class 4500, including job-rated intermediate classes, with butt weld, socket weld, RF or RTJ ends to ANSI 150-2500 or UNI-DIN 10-400. Maximum temperature is 650 °C.
Actuation is pneumatic (model 87/88 multi-spring or 37/38 spring diaphragm), cylinder or hydraulic. A rapid-stroke actuator gives full travel in under 1 second, against the 2-3 second range of a standard pneumatic unit. Construction and testing follow ASME B16.34, ASME B16.5 and ASME B31.1/B31.3, with PED and SIL3 compliance.
Technical specifications
| Duty | steam pressure reduction and desuperheating |
|---|---|
| Body type | globe, angle, forged, Z pattern |
| Trim size | 3 to 24 inches (80 to 600 mm) |
| Pipe size | 3 to 48 inches (80 to 1200 mm) |
| Seat diameter | 50 to 600 mm |
| Rated Cv | up to 5800 |
| Pressure class | up to ASME Class 4500 |
| End connections | BW, SW, RF, RTJ; ANSI 150-2500, UNI-DIN 10-400 |
| Temperature | up to 650 °C |
| Trim | Lo-dB 1 to 4 stages, V-Log |
| Characteristic | linear or equal percentage |
| Turndown | up to 50:1 |
| Shut-off | Class V |
| Stroke time | under 1 s with rapid-stroke actuator |
Request a price and lead time
SteamForm 84000 Series Steam Conditioning Valve, Cv to 5800, 650 °C Rated. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Where is the SteamForm valve typically installed?
On steam turbine bypass systems, auxiliary and process steam letdown stations and boiler extraction lines in power, refining, chemical and paper plants.
What spray water pressure is needed?
Water has to be at least 150 psi (11.5 bar) above the outlet steam pressure so that it atomises properly.
How fast can it open for a turbine trip?
With a rapid-stroke actuator full travel takes under 1 second; standard pneumatic actuators are typically in the 2-3 second range.
Similar equipment from other manufacturers






