
Series 80000 heavy-duty three-way globe control valve, combining or diverting
A heavy-duty globe valve with three ports that either blends two flows into one or splits a single flow between two outlets. Power stations use it on heat recovery steam generators, turbine hall circuits and balance-of-plant systems.
- Type
- three-way globe control valve, dual seated
- Model 80385
- combining service
- Model 80386
- diverting service
- Model 803851
- diverting, sizes 0.75 in and 1 in
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Plug guidance is the first thing to note. The plug is guided at the top and again at the seat rings, so it is well supported against side loads and stays steady while throttling. Being dual seated, with the process pushing towards opening at both ports, the valve controls without hunting. Generous flow galleries give high capacity with low pressure recovery, and critical flow factors stay high whether the valve is combining or diverting.
One series covers both duties. Model 80385 is the combining build, 80386 is for diverting, and 803851 handles diverting duty in the two smallest sizes, 0.75 in and 1 in. A single three-way body often replaces a pair of two-way valves on heat exchanger bypasses, mixing temperature loops and circuit changeovers, where total flow should stay constant.
Body material sets the temperature window. Carbon steel bodies cover -29°C up to 232°C; stainless keeps the same low end and lifts the upper limit to 427°C; chrome-moly sits between 0°C and 232°C. So the choice follows the fluid, the operating temperature and the corrosion allowance.
Typical installations include reactor and turbine buildings, station grounds and balance-of-plant, and heat recovery steam generators on combined-cycle units. It is supplied with a pneumatic diaphragm or cylinder actuator to suit the duty.
Technical specifications
| Type | three-way globe control valve, dual seated |
|---|---|
| Model 80385 | combining service |
| Model 80386 | diverting service |
| Model 803851 | diverting, sizes 0.75 in and 1 in |
| Flow direction | tends to open at both ports |
| Plug guiding | top and seat ring |
| Carbon steel body | from -29°C up to 232°C |
| Stainless steel body | from -29°C up to 427°C |
| Chrome-moly body | from 0°C up to 232°C |
| Applications | power generation, HRSG, balance-of-plant |
Request a price and lead time
Series 80000 heavy-duty three-way globe control valve, combining or diverting. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What separates the 80385 from the 80386?
The 80385 brings two streams together, the 80386 divides one stream in two. For diverting in the 0.75 in or 1 in size, the 803851 is used.
How hot can the process be?
Up to 427°C with a stainless body. Carbon steel and chrome-moly bodies are limited to 232°C.
Why does it throttle so steadily?
It is dual seated with flow tending to open both ports, and the plug is guided at the top and at the seat rings, so it does not wobble.
Similar equipment from other manufacturers






