International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Series 75000 Sweep-Angle Control Valve, Tank Bottom Drain and Level Duty, 25 to 450 mm

Angle-pattern valve for draining tanks and controlling vessel level where the fluid carries solids. A full sweep-angle passage and heavy-duty plug cut down the erosive effect of slurry on the internals.

Type
cast angle, 90°, 120°, 135°
Sizes
25 × 25…450 × 450 mm (1 × 1…18 × 18 inch)
Pressure rating
ANSI 150–1500, flanged
End connections
RF/RTJ to ASME B16.5

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Purified terephthalic acid (PTA) plants are the classic home of the 75000 series, together with other petrochemical units handling erosive slurries, crystallising streams and corrosive or viscous liquids. Typical positions are the bottom outlet of a storage tank and level loops on vessels and reactors.

Body sizes range from 25 × 25 mm to 450 × 450 mm (1 × 1 to 18 × 18 inch), with RF or RTJ flanges to ASME B16.5 in ANSI ratings 150 to 1500. Available body materials are stainless steel including 316, duplex stainless, titanium and alloy C. Service temperature runs from -29 °C to 360 °C.

The cast body is offered with 90°, 120° or 135° sweep. Because the body splits, the trim is reached from below and no separate bonnet is used. Stem and plug are machined as one piece, single-seated and guided at both ends, and the seat ring can be swapped quickly. Flushing and purge ports help where deposits build up.

Flow characteristic is linear or contoured, flow may be arranged to open or to close the valve, rangeability is 50:1, and a reduced-capacity trim exists. A wiper-type packing keeps friction low while throttling, and a handwheel or hand jack can be added.

Seat leakage is Class IV as standard, rising to Class V to IEC 60534-4 when a high-thrust actuator is fitted. Spring-diaphragm or Model 51/52/53 piston actuators can be used. The 75683 model belongs to the series.

Technical specifications

Typecast angle, 90°, 120°, 135°
Sizes25 × 25…450 × 450 mm (1 × 1…18 × 18 inch)
Pressure ratingANSI 150–1500, flanged
End connectionsRF/RTJ to ASME B16.5
Body materialsstainless steel, duplex, titanium, alloy C
Plugsingle seat, top and bottom guided, one-piece stem and plug
Seatquick change
Characteristiclinear or contoured
Cv rangeability50:1
Temperature-29…360 °C
Seat leakageClass IV; Class V with high-thrust actuator
Actuatorspring-diaphragm, piston Model 51/52/53

Request a price and lead time

Series 75000 Sweep-Angle Control Valve, Tank Bottom Drain and Level Duty, 25 to 450 mm. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Where is the 75000 series normally installed?

On tank bottom drains and vessel or reactor level loops, especially in PTA production and other erosive slurry or crystallising services.

Which body angles are available?

The cast body comes with a 90°, 120° or 135° sweep angle.

What shut-off class can be reached?

Class IV as standard, and Class V to IEC 60534-4 with a high-thrust actuator.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides