
Forged Concentric and Eccentric Reducers and Pipe Caps, 1/8 up to 6 NPS
One-piece forged reducers without a weld seam for changing line size, in concentric and eccentric patterns, together with butt-weld and threaded end caps. Socket-weld and threaded items span 1/8 up to 6 NPS with pressure ratings of 3000, 6000 or 9000.
- Type
- forged reducer / cap
- Size
- 1/8 NPS – 6 NPS
- Class
- 3000, 6000, 9000
- Design
- ASME B16.11
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
An eccentric reducer keeps one side of the pipe straight, which is what stops air pockets forming on top or sediment collecting underneath, so it is the usual pick at a pump suction. A concentric reducer keeps the centreline and suits vertical runs and discharge lines. Caps simply close off a line end.
The reducers are forged in one piece with no weld seam, in both concentric and eccentric forms, designed in accordance with MSS SP-75 and ASME B16.9. Caps come in butt-weld and threaded configurations and are made to ASME Section I and Section VIII as well as B16.9 and B16.11. All material grades and sizes can be supplied.
For the socket-weld and threaded items, sizes go from 1/8 up to 6 NPS with pressure ratings of 3000, 6000 or 9000. ASME B16.11 governs their design and laying length as well as the socket dimensions, NPT threads are cut per ASME B1.20.1, and items are marked per MSS SP-25.
When ordering, state the type (concentric reducer, eccentric reducer or cap), both end sizes, wall thickness or class, end type and material. 3D CAD models are available for layout work.
Technical specifications
| Type | forged reducer / cap |
|---|---|
| Size | 1/8 NPS – 6 NPS |
| Class | 3000, 6000, 9000 |
| Design | ASME B16.11 |
| Reducers | one-piece, concentric and eccentric, MSS SP-75, B16.9 |
| Caps | butt weld and threaded, ASME Section I, Section VIII, B16.9, B16.11 |
| Marking | MSS SP-25 |
| Laying length | ASME B16.11 |
| Ends for socket welding | ASME B16.11 |
| Thread | NPT, ASME B1.20.1 |
Request a price and lead time
Forged Concentric and Eccentric Reducers and Pipe Caps, 1/8 up to 6 NPS. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
When should an eccentric reducer be used?
Where one side of the line must stay flat to avoid trapped air or settled solids, a typical case being a pump suction.
Which standards apply to the caps?
Butt-weld and threaded caps are made to B16.9 and B16.11 and to ASME Section I and Section VIII.
What ratings apply to socket-weld and threaded items?
3000, 6000 and 9000, in sizes from 1/8 up to 6 NPS.
Similar equipment from other manufacturers






