International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

73000 Series Sweep Angle Control Valve for Erosive, Flashing and Two-Phase Service

An angle-pattern control valve whose body passage curves smoothly from inlet to outlet. It is intended for throttling fluids that wear out ordinary globe bodies: highly erosive liquids, flashing flow and two-phase mixtures.

Series
73000 Sweep Angle
Type
angle-pattern control valve
Flow path
smoothly swept body passage
Service
erosive liquids, flashing, two-phase flow

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Flashing service is hard on valves. Once pressure drops below the vapour point downstream of the trim, part of the liquid boils off, and the resulting mix of droplets and vapour scours any surface it hits head-on. Add solids to the stream and a straight-through globe body can be worn away surprisingly quickly.

The 73000 series answers this with geometry. Its swept angle body turns the flow along a gentle curve instead of forcing it round sharp corners and dead pockets, so the heaviest wear is concentrated on the trim, which can be serviced, rather than on the pressure-retaining casting.

The instruction manual covers installation, disassembly, lapping of the valve seat, reassembly and attention to the packing box. In practice this means seat tightness can be restored on site without replacing the body. Before any work the valve must be isolated and depressurised, and site safety rules apply alongside the manual.

Within the same product family the valve can be paired with Type 87/88 spring-diaphragm actuators or pneumatic piston actuators, SVI series digital positioners, a Model 4411 electro-pneumatic transducer, BR200/BR400 booster relays and 496 series rotary switches. Actuator and trim are selected from process data, so an enquiry should state the fluid, flow rate and upstream and downstream pressures.

Technical specifications

Series73000 Sweep Angle
Typeangle-pattern control valve
Flow pathsmoothly swept body passage
Serviceerosive liquids, flashing, two-phase flow
ActuatorsType 87/88 spring-diaphragm, pneumatic piston
PositionersSVI series
AccessoriesModel 4411, BR200/BR400, 496 series
Maintenanceseat lapping, packing box

Request a price and lead time

73000 Series Sweep Angle Control Valve for Erosive, Flashing and Two-Phase Service. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which duties is the 73000 series meant for?

Throttling highly erosive liquids, flow that flashes downstream of the trim, and two-phase liquid and vapour mixtures.

What actuators can be fitted?

The family includes Type 87/88 spring-diaphragm actuators and pneumatic piston actuators, controlled through SVI series positioners.

Can the seat be refurbished in place?

Yes, the manual sets out disassembly, seat lapping, reassembly and packing box service.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides