International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

72000 Series Fabricated Angle Control Valve for Large Mass Flow and Noise Reduction, DN 100–750

A fabricated angle-body control valve that meters very large gas flows at high pressure ratios while one or two cages break up the jet, cutting noise and outlet velocity. Compressor anti-surge, gas-to-flare and atmospheric vent lines are its usual territory.

Body type
fabricated angle
Inlet size
4–30 in (DN 100–750)
Outlet size
6–36 in (DN 150–900)
Inlet rating
ASME 150–2500

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Inside, a balanced plug is guided in a single or double cage. The cages split the flow into many small streams, which lowers both the sound level and the velocity leaving the valve; Lo-dB and V-LOG trims are alternatives for harder cases. Characteristic is linear or equal percentage, and flow-to-open is standard. Because each valve is engineered around its duty, a delivered unit may differ from the general data.

Inlets run from 4 in to 30 in (DN 100–750) and outlets from 6 in to 36 in (DN 150–900), giving body sizes from 6 x 8 in through 36 x 48 in (150 x 200 to 900 x 1200 mm). The inlet side can be rated to ASME Class 150–2500, the outlet to Class 150–600. Ends are flanged to ANSI 150–600 or UNI-DIN 10–100, or butt-welded.

Bodies are built in carbon steel, stainless steel or chrome-moly, with separate material sets for hydrocarbon and steam service. The temperature span reaches from −196 °C to +594 °C, although any PTFE parts cap it at 232 °C. Actuation is by Model 51, 52 or 53 piston cylinders or Type 87/88 spring-diaphragm units.

Noise is predicted to IEC 60534-8-3 and testing follows MSS-SP-61. Materials can meet NACE MR0103 and NACE MR0175/ISO 15156 for sour service.

Outside anti-surge and flare duty, the series appears in LNG plants, petrochemical units and gas depressurisation systems: wherever a large valve has to drop a high inlet-to-outlet pressure ratio without the noise that would normally follow.

Technical specifications

Body typefabricated angle
Inlet size4–30 in (DN 100–750)
Outlet size6–36 in (DN 150–900)
Inlet ratingASME 150–2500
Outlet ratingASME 150–600
End connectionsflanged ANSI 150–600, UNI-DIN 10–100; butt weld
Trimbalanced, cage guided (single or double); Lo-dB, V-LOG
Characteristiclinear or equal percentage
Flow directionflow-to-open (standard)
Body materialscarbon steel, stainless steel, chrome-moly
Temperature−196 to +594 °C
Actuatorspiston 51/52/53; spring diaphragm 87/88
StandardsIEC 60534-8-3, MSS-SP-61, NACE MR0103, NACE MR0175/ISO 15156

Request a price and lead time

72000 Series Fabricated Angle Control Valve for Large Mass Flow and Noise Reduction, DN 100–750. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What duties is the 72000 Series intended for?

Large mass flows at high differential pressure, such as compressor anti-surge, gas-to-flare, atmospheric venting and gas depressurisation.

Which sizes and pressure classes are offered?

Inlets of 4–30 in (DN 100–750) up to ASME Class 2500, outlets of 6–36 in (DN 150–900) up to Class 600.

Can it handle cryogenic service?

The temperature range starts at −196 °C and reaches +594 °C; PTFE components limit it to 232 °C.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides