International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

36005 Series V-Max™ high-capacity V-port ball valve for throttling service

A heavy-duty rotary throttling valve that pairs a straight-through body with a V-notched ball segment. Three seal ring choices cover Class VI or Class IV shut-off, and integral raised-face flanges keep installation simple.

Type
rotary throttling valve, V-notched ball segment
Characteristic
equal percentage
Rangeability
greater than 500:1
Flow path
straight-through

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Shut-off class is settled by the seal ring. The standard MN-7 ring, a low-friction polymer, seals to Class VI. A 316 stainless steel ring needs no shims, holds Class IV and, combined with stellite bearings and flexible graphite packing, takes the valve to higher temperatures. For harsh duty on NPS 1–4 there is an optional heavy-duty metal ring whose wiping action against the ball stops deposits building up, so Class IV is held over a long service life.

Flow passes straight through the body, giving large capacities, while the patented ball with a dual-characterised V-notch delivers an equal percentage characteristic and rangeability greater than 500:1. That combination suits refineries, petrochemical units, pulp and paper mills, slurries and viscous fluids, wherever very high capacity has to go with accurate control.

Raised-face flanges are cast integrally with the body to ASME Class 150 or 300, so long tie rods are not needed and alignment in the line is quicker. Two face-to-face options exist: the standard body follows ISA S75.04 and IEC 534-3-2, and a short pattern follows ASME B16.10 (ASME Class 150 only). Shaft sealing uses the EF packing system for very low emissions.

On site, the actuator position can be changed and the valve action reversed, air-to-open or air-to-close, without replacing body parts. The maintenance instructions cover pipeline mounting, air piping and bracket subassembly work.

Technical specifications

Typerotary throttling valve, V-notched ball segment
Characteristicequal percentage
Rangeabilitygreater than 500:1
Flow pathstraight-through
MN-7 seal ringpolymer, Class VI
316 stainless steel seal ringClass IV, no shims
Heavy-duty metal seal ringoption for NPS 1–4, Class IV
Connectionsintegral raised-face flanges, ASME 150 or 300
Face-to-faceISA S75.04 / IEC 534-3-2; short pattern ASME B16.10 (Class 150)
Shaft sealingEF low-emission packing

Request a price and lead time

36005 Series V-Max™ high-capacity V-port ball valve for throttling service. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What shut-off class does the V-Max™ reach?

Class VI with the standard MN-7 polymer ring, and Class IV with the 316 stainless steel or heavy-duty metal ring.

Is it suitable for slurry service?

Yes. The optional heavy-duty metal ring for NPS 1–4 wipes the ball as it turns and prevents deposits from building up.

Which face-to-face dimensions are offered?

The standard body follows ISA S75.04 and IEC 534-3-2; a short pattern to ASME B16.10 is available in ASME Class 150.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides