
Orbitalum RPG pipe facing machine for tube preparation, 3.00–219.10 mm
Orbitalum RPG is a series of portable machines for cold mechanical facing of tube ends before orbital welding. The end comes out square and burr-free, ready for an I-type joint without grinding. The series covers tube diameters from 3.00 to 219.10 mm.
- Brand
- Orbitalum
- Type
- pipe facing machine, cold mechanical machining
- Models
- RPG ONE, RPG 1.5, RPG 3.0, RPG 4.5 (S), RPG 8.6
- Pipe diameter RPG ONE
- 3.00–25.40 mm
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Orbitalum RPG machines prepare tube ends by cold mechanical facing, so no heat enters the metal, the edge is clean and free of burrs, and central clamping gives a square end. A tube prepared this way goes straight into an I-type joint without grinding or hand cleaning, so a separate finishing step drops out of the route. If needed, a tool holder can be fitted to chamfer the edge.
The series has five models, each covering a different diameter range. The RPG ONE takes tubes of 3.00 – 25.40 mm outside diameter, the RPG 1.5 takes 3.00 – 38.10 mm, the RPG 3.0 takes 6.00 – 77.00 mm, the RPG 4.5 (S) takes 12.70 – 114.30 mm, and the RPG 8.6 takes 50.80 – 219.10 mm. The RPG ONE, RPG 1.5 and RPG 3.0 also come in battery versions with a brushless motor, lithium-ion batteries and an AIR COOLED charger. These suit locations without mains power, hard-to-reach spots during installation and clean rooms.
Clamping shells change without tools, and self-centring clamping speeds up repositioning the tube, with accessories fitting every machine in the series. A Torx screwdriver is needed to replace the cutting insert. The indexable inserts have two cutting edges and a wear-resistant coating, so end quality stays the same across materials and holds through many cycles. Set-up for series work or installation jobs takes little time, and a short briefing is enough for an operator.
The machines are compact, weighing from 2.88 kg, and with the optional angle drive the overall length drops to 200 mm. That helps in tight recesses and on pipework that is already installed. A carry case with compartments for the tooling is supplied. For micro-fittings, clamping shells are available from a 3 mm tube diameter, with a 4 mm clamping length.
Because the machining is clean with minimal contamination, the RPG is used in pharmaceuticals, semiconductor production, and the food and chemical industries. Compatible materials are stainless steel, aluminium, titanium, unalloyed and low-alloy steels. Orbitalum also names aerospace, heat exchanger manufacturing, renewable energy and data centre cooling. The machine's core task is repeatable tube preparation for orbital welding with controlled quality.
Technical specifications
| Brand | Orbitalum |
|---|---|
| Type | pipe facing machine, cold mechanical machining |
| Models | RPG ONE, RPG 1.5, RPG 3.0, RPG 4.5 (S), RPG 8.6 |
| Pipe diameter RPG ONE | 3.00–25.40 mm |
| Pipe diameter RPG 1.5 | 3.00–38.10 mm |
| Pipe diameter RPG 3.0 | 6.00–77.00 mm |
| Pipe diameter RPG 4.5 (S) | 12.70–114.30 mm |
| Pipe diameter RPG 8.6 | 50.80–219.10 mm |
| Battery versions | RPG ONE, RPG 1.5, RPG 3.0 |
| Weight | from 2.88 kg |
| Length with angle drive (optional) | 200 mm |
| Clamping shells for micro-fittings | from 3 mm diameter, clamping length 4 mm |
| Materials | stainless steel, aluminium, titanium, unalloyed and low-alloy steels |
Request a price and lead time
Orbitalum RPG pipe facing machine for tube preparation, 3.00–219.10 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which RPG model handles the largest tubes?
The RPG 8.6, with an outside diameter of 50.80 – 219.10 mm. For the smallest tubes from 3.00 mm, the RPG ONE and RPG 1.5 are suitable.
Are there versions that run without mains power?
Yes, the RPG ONE, RPG 1.5 and RPG 3.0 are available as battery versions with a brushless motor and lithium-ion batteries.
Is grinding needed after RPG facing before welding?
No, the end comes out square and burr-free, ready for an I-type joint without grinding. A chamfer tool holder can be fitted if the edge needs a bevel.
Similar equipment from other manufacturers






