International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN PLANFIX 115 S pipe bevelling and facing tool for 9.53–114.3 mm pipes

ALFA IN PLANFIX 115 S squares off the end of a pipe and cuts the bevel for a joint, using knives at 30° or 37.5°. Its clamping range is OD 9.53–114.3 mm with walls up to 4 mm, and it suits both installation and workshop use.

Brand
ALFA IN
Country of manufacture
Czech Republic
Type
bevelling and facing tool for pipes
Model
PLANFIX 115 S

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The PLANFIX 115 S covers the middle range of pipe diameters, from 9.53 mm up to 114.3 mm OD with walls up to 4 mm thick. It does two jobs: first it brings the pipe end square to the axis, then, with the right knife fitted, it cuts the bevel a weld needs. The part number of the unit is 1.1.4200. Compared with the smaller PLANFIX model, it takes a wider range of diameters.

Workshops use it to prepare batches of pipe before assembly, while site crews run it on individual joints before a pipe, elbow or tee is connected. The maker states that it suits both installation work and workshop use.

The pipe is held by clamping jaws, and the accuracy of the finished face depends on how firmly they grip, because the tube must not shift while metal comes off. Jaws from the OSK 115 welding head fit this unit, so a shop that already runs that head can move the jaws between welding and preparation equipment.

Cutting knives are ordered separately. The maker recommends knife 1.2.4114, sold in packs of 10, and a bevel knife is also available at 30° or 37.5°. The angle is picked from the welding procedure and the wall thickness.

A square end with an even bevel all the way round matters before orbital or manual TIG welding. The edges meet without a wedge gap, the root gap stays steady and the root penetrates evenly. When you send us your pipe diameters and wall thicknesses, we check them against the PLANFIX 115 S range and assemble the unit with the knives and jaws you need.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
Typebevelling and facing tool for pipes
ModelPLANFIX 115 S
Outside diameter of pipe (OD)9.53–114.3 mm
Maximum wall thickness4 mm
Clamping jawscompatible with OSK 115 welding head jaws
Bevelling knives1.2.4114 (10 pcs per pack); bevel knife at 30° or 37.5° on request
Applicationinstallation, workshop

Part numbers

Show all part numbers (2)

1.1.4200, 1.2.4114

Request a price and lead time

ALFA IN PLANFIX 115 S pipe bevelling and facing tool for 9.53–114.3 mm pipes. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What pipe range does the PLANFIX 115 S cover?

An outside diameter of 9.53–114.3 mm and a wall thickness up to 4 mm.

Which bevel angles are available?

Along with knife 1.2.4114, the maker offers a bevel knife at 30° or 37.5°.

Can the clamping jaws from an orbital welding head be used?

Yes, the clamping jaws from the OSK 115 welding head can be used.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides