International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN S-150LT Orbital Pipe Saw for 20–170 mm OD and 1–8 mm Walls

The ALFA IN S-150LT makes square, distortion-free cuts in pipe and can bevel the end in the same set-up, ready for welding. It is the mid-sized model in the S-LT orbital saw range, covering pipe from 20 to 170 mm OD and walls from 1 to 8 mm, and it weighs 66 kg.

Brand
ALFA IN
Country of manufacture
Czech Republic
Type
orbital pipe saw with electric drive
Outside diameter (OD) of pipe
20–170 mm

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The S-150LT sits in the middle of the ALFA IN orbital saw line, taking pipe with an outside diameter between 20 and 170 mm, so it overlaps the smaller and larger models at both ends of the range. It cuts walls from 1 to 8 mm, and the machine itself weighs 66 kg. The saw carries part number 1.2.4512.

Rather than crushing or ovalising a thin-walled stainless tube, the saw travels around the circumference and leaves a level, square face. For orbital or manual welding that face is ready to use straight away: the end is square, the tube stays round, and the joint closes up without further fitting.

The same set-up also cuts the bevel. Angles of 30°, 32°, 35°, 37.5°, 40° and 45° are available, and repositioning the cutting disc allows elbows to be cut. A fixed cutting-point gauge and a scale adjusted to the pipe diameter speed up marking out when a run of identical blanks is needed.

Two saw blades are offered. The GF pr.68mm tl.1.0-3.0 blade with 72 teeth (1.3.4520) suits walls of 1–3 mm, while the GF pr.68mm tl.2,5-7,0mm blade with 44 teeth (1.3.4521) covers 2.5–7 mm. A 250 ml tube of blade lubricant (1.3.4525) extends tooth life. The package includes the electrically driven saw, one cutting disc, disc lubricant, a tool kit and a transport case. The saw is portable and can be used at a fixed workstation or taken to site. On request we check your pipe diameters and wall thicknesses against the S-150LT range and select blades for your material.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
Typeorbital pipe saw with electric drive
Outside diameter (OD) of pipe20–170 mm
Wall thickness cut1–8 mm
Bevel angles30°, 32°, 35°, 37.5°, 40°, 45°
Elbow cuttingyes, by changing the cutting disc position
Adjustmentfixed cutting-point gauge and scale set to pipe diameter
Weight66 kg
Saw bladesGF pr.68mm tl.1.0-3.0, 72 teeth (1.3.4520) for 1–3 mm walls; GF pr.68mm tl.2,5-7,0mm, 44 teeth (1.3.4521) for 2.5–7 mm walls
Blade lubricant250 ml tube (1.3.4525)
Supplied withelectric saw, one cutting disc, disc lubricant, tool kit, transport case

Part numbers

Show all part numbers (4)

1.2.4512, 1.3.4520, 1.3.4521, 1.3.4525

Request a price and lead time

ALFA IN S-150LT Orbital Pipe Saw for 20–170 mm OD and 1–8 mm Walls. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which pipes does the S-150LT cut?

Pipe with an outside diameter of 20–170 mm and a wall of 1–8 mm, including thin-walled stainless steel, without distortion.

Which blade should I use for thin walls?

For walls of 1–3 mm the GF pr.68mm tl.1.0-3.0 blade with 72 teeth (1.3.4520) is used, and for 2.5–7 mm the 44-tooth blade (1.3.4521).

Does the saw cut a bevel for welding?

Yes, the manufacturer lists bevel angles of 30°, 32°, 35°, 37.5°, 40° and 45°.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides