International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Orbitalum HX Heads orbital welding heads for heat exchangers, tubes 9.50 to 25.40 mm

Orbitalum HX Heads are closed orbital heads for welding tubes in tight tube bundles, mainly in finned HVAC heat exchangers. A single joint takes under 30 seconds, and one head can make up to 250 welds per shift.

Brand
Orbitalum
Country
Germany
Type
closed orbital welding heads
Models
HX 12P, HX 16P, HX 25P

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Orbitalum built the HX series for making finned HVAC heat exchangers, where tubes stand close together and there is little room for tools. The three models differ in tube diameter and pitch. The HX 12P takes tubes from 9.50 to 13.30 mm with tube spacing below 40 mm. The HX 16P is sized for 15.00 to 16.80 mm tubes and is aimed at dense tube fields in finned units. The HX 25P accepts 18.00 to 25.40 mm tubes with spacing below 60 mm.

According to the maker, a joint takes under 30 seconds, a single head completes up to 250 welds per shift, and one operator can keep several heads running at the same time. Preparation time is halved compared with manual welding, and the reject rate falls from as much as 4% to below 0.7%. The welds come out clean with no edge offset, gaps or burrs even in dense bundles. The root is sound and free of heat tint, so finishing is usually not needed.

Clamping is pneumatic and needs no tools, so one press of a button fixes the head and moving to the next joint is quick. The controls sit directly on the head. Power sources from the ORBIMAT range recognise the head automatically, and compatible units include the Mobile Welder OC Plus and the Smart Welder Plus. Even trained staff with limited experience get consistent results. Power, gas and cooling water connections are built into the head, which keeps its body narrow and compact.

The rotor housing is liquid cooled and guarded against overheating, and the closed design is meant for long duty in industrial conditions. The hose package is 7.5m long. The head can be fitted in any position, whether horizontal, vertical or inclined. The maker names heat exchangers, aerospace and semiconductor work, pharmaceutical and biotech production, food and beverage, renewable energy and data centre cooling among the sectors it serves.

Technical specifications

BrandOrbitalum
CountryGermany
Typeclosed orbital welding heads
ModelsHX 12P, HX 16P, HX 25P
Tube diameter HX 12P9.50–13.30 mm
Tube diameter HX 16P15.00–16.80 mm
Tube diameter HX 25P18.00–25.40 mm
Tube spacing HX 12P< 40 mm
Tube spacing HX 25P< 60 mm
Time per jointunder 30 s
Outputup to 250 welds per shift per head
Clampingpneumatic, tool-free
Coolingliquid, rotor housing
Hose package7.5m
Compatible power sourcesMobile Welder OC Plus, Smart Welder Plus, ORBIMAT recognition

Request a price and lead time

Orbitalum HX Heads orbital welding heads for heat exchangers, tubes 9.50 to 25.40 mm. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which HX head should I choose for a 16 mm tube?

The HX 16P. It works with tubes from 15.00 to 16.80 mm and is designed for tight tube fields in finned heat exchangers.

What is the output of the HX heads?

Under 30 seconds per tube joint and up to 250 welds per shift per head. One operator can run several heads in parallel.

How is the head cooled?

The rotor housing is liquid cooled, and the power, gas and cooling water connections are built into the head.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides