
ALFA IN S-200LT Orbital Pipe Saw for 60–220 mm OD and 1–8 mm Walls
The ALFA IN S-200LT is the largest saw in the S-LT orbital range, cutting pipe from 60 to 220 mm OD with walls of 1 to 8 mm. It weighs 77 kg and cuts square without distortion, with bevels from 30° to 45° for orbital and manual welding.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Type
- orbital pipe saw with electric drive
- Outside diameter (OD) of pipe
- 60–220 mm
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The S-200LT handles the largest pipe in the ALFA IN orbital saw series, with an outside diameter from 60 to 220 mm. Its lower limit sits above that of the smaller models, so it is not the choice for small bore pipe and is intended for large-diameter runs. It cuts walls from 1 to 8 mm, weighs 77 kg, and carries part number 1.2.4511.
The cutting unit rotates around the stationary pipe and produces a level, square cut without flattening the tube. This also applies to thin-walled stainless tube, which on an ordinary saw easily loses its roundness. Once cut, the end is ready for fit-up of a joint for orbital or manual welding, with no further preparation.
Beyond a straight cut, the saw bevels at 30°, 32°, 35°, 37.5°, 40° and 45°. Repositioning the cutting disc lets it cut elbows. For batch work there is a fixed cutting-point gauge and a scale set to diameter, so identical blanks can be produced without re-marking each one.
Blades are matched to material and wall. The manufacturer offers the GF pr.68mm tl.1.0-3.0 blade with 72 teeth (1.3.4520) for 1–3 mm walls and the GF pr.68mm tl.2,5-7,0mm blade with 44 teeth (1.3.4521) for 2.5–7 mm walls. Blade lubricant is sold separately in a 250 ml tube (1.3.4525), and it extends tooth life. The saw comes with an electric drive, one cutting disc, disc lubricant, a tool kit and a transport box. Despite its weight it is portable and works in the workshop or on site. We can check your diameters against the S-200LT range and, if your pipes are smaller, recommend a smaller model in the series.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Type | orbital pipe saw with electric drive |
| Outside diameter (OD) of pipe | 60–220 mm |
| Wall thickness cut | 1–8 mm |
| Bevel angles | 30°, 32°, 35°, 37.5°, 40°, 45° |
| Elbow cutting | yes, by changing the cutting disc position |
| Adjustment | fixed cutting-point gauge and scale set to pipe diameter |
| Weight | 77 kg |
| Saw blades | GF pr.68mm tl.1.0-3.0, 72 teeth (1.3.4520) for 1–3 mm walls; GF pr.68mm tl.2,5-7,0mm, 44 teeth (1.3.4521) for 2.5–7 mm walls |
| Blade lubricant | 250 ml tube (1.3.4525) |
| Supplied with | electric saw, one cutting disc, disc lubricant, tool kit, transport box |
Part numbers
Show all part numbers (4)
1.2.4511, 1.3.4520, 1.3.4521, 1.3.4525
Request a price and lead time
ALFA IN S-200LT Orbital Pipe Saw for 60–220 mm OD and 1–8 mm Walls. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the S-200LT differ from the smaller saws in the series?
It takes pipe with an OD of 60–220 mm and weighs 77 kg, while the wall range and bevel angles are the same.
Which wall thickness does the saw cut?
From 1 to 8 mm; for 1–3 mm the 72-tooth blade (1.3.4520) is used, and for 2.5–7 mm the 44-tooth blade (1.3.4521).
Can it cut elbows?
Yes, elbows are cut after the cutting disc is repositioned.
Similar equipment from other manufacturers






