International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

Lorch MicorMIG Pulse 300–500 pulsed MIG/MAG welding machines, up to 500 A

The Lorch MicorMIG Pulse series comprises pulsed MIG/MAG welders with low spatter, where the pulsed arc is stable and easy to control. The four models rated at 300, 350, 400 and 500 A also work in TIG, MMA and gouging modes.

Brand
Lorch
Country of manufacture
Germany
Models
MicorMIG Pulse 300 / 350 / 400 / 500
Processes
MIG/MAG Pulse, MMA, TIG, gouging

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Pulsed welding is the main feature of this series. The pulsed arc is stable and well controlled, so the weld comes out almost free of spatter, even in the transition zone where a conventional machine would be spattering. The line suits welding of steel, stainless steel and aluminium wherever a clean seam and repeatable results matter, and the manufacturer's material refers to EN1090 requirements.

There are four models, MicorMIG Pulse 300, 350, 400 and 500, with welding current ranges of 25–300 A, 25–350 A, 30–400 A and 30–500 A, and the voltage is adjusted smoothly. At 40 °C they carry 200, 250, 300 and 370 A at a 100% duty cycle, and 250, 300, 370 and 430 A at 60%. At the maximum current the duty cycle is 45%.

The wire feeder has four rollers, two of them driven. The 300 and 350 models feed steel wire of 0.6–1.2 mm and aluminium wire of 1.0–1.2 mm, while the 400 and 500 take steel wire of 0.6–1.6 mm and aluminium wire of 1.0–1.6 mm. In pulse mode every model works with steel wire of 0.8–1.2 mm and aluminium wire of 1.0–1.2 mm.

All models run from a three-phase 400 V, 50/60 Hz supply with a ±15% tolerance, and at reduced output power they keep working when the mains voltage sags by up to 30%. The fuse rating is 32 A with a CEE 32 plug. The A system is a compact mobile unit with a built-in feeder, measuring 880x490x885 mm and weighing 58, 58, 61 and 66 kg with gas cooling. The B system has an 880x490x955 mm power source and a separate 10.6 kg wire feed case, and a filled water cooling unit weighs 13.0 kg. The machines meet EN 60974-01, with IP23S protection, insulation class F, and CE and S marking.

The BasicPlus panel offers a “3 steps to weld” scheme, smooth current control, voltage and current readouts, crater filling, seven arc-dynamics steps, synergic settings, programme selection in the wire feed compartment, and switching between 2-step, 4-step, spot and interval modes. ControlPro adds an OLED display for the third main parameter, a prompted menu, 21 arc-dynamics steps and Tiptronic memory for 100 welding jobs. Both panels can be fully upgraded.

Technical specifications

BrandLorch
Country of manufactureGermany
ModelsMicorMIG Pulse 300 / 350 / 400 / 500
ProcessesMIG/MAG Pulse, MMA, TIG, gouging
Welding current range25-300 / 25-350 / 30-400 / 30-500 A
Voltage settingsmooth
Duty cycle 100% at 40 °C200 / 250 / 300 / 370 A
Duty cycle 60% at 40 °C250 / 300 / 370 / 430 A
Duty cycle at maximum current, 40 °C45%
Wire feeder4 rollers (2 driven)
Steel wire0.6-1.2 / 0.6-1.2 / 0.6-1.6 / 0.6-1.6 mm
Aluminium wire1.0-1.2 / 1.0-1.2 / 1.0-1.6 / 1.0-1.6 mm
Steel wire, Pulse0.8-1.2 mm
Aluminium wire, Pulse1.0-1.2 mm
Mains voltage400 V, 3~, 50/60 Hz
Mains tolerance+15% / -15%
Max negative mains tolerance at reduced output30%
Mains fuse32 A
Mains plugCEE 32
Power source dimensions, A version (LxWxH)880x490x885 mm
Power source dimensions, B version (LxWxH)880x490x955 mm
Weight of power source, A version, gas-cooled58 / 58 / 61 / 66 kg
Weight of wire feed case (workshop version)10.6 kg
Weight of water cooling unit (filled)13.0 kg
Control panelsBasicPlus, ControlPro
StandardEN 60974-01
Protection class (EN 60529)IP23S
Insulation classF
MarkingCE, S

Part numbers

Show all part numbers (4)

MicorMIG Pulse 300, MicorMIG Pulse 350, MicorMIG Pulse 400, MicorMIG Pulse 500

Request a price and lead time

Lorch MicorMIG Pulse 300–500 pulsed MIG/MAG welding machines, up to 500 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which wire can be pulse welded on the MicorMIG Pulse?

In pulse mode every model works with steel wire of 0.8–1.2 mm and aluminium wire of 1.0–1.2 mm.

Does the machine keep working when the mains voltage dips?

The nominal tolerance of the 400 V supply is ±15%, and at reduced output power the machine works with a mains sag of up to 30%.

What is the duty cycle of the MicorMIG Pulse 400?

At 40 °C it carries 300 A at a 100% duty cycle, 370 A at 60%, and 45% at its maximum 400 A.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides