
Lorch MicorMIG 300–500 inverter MIG/MAG welding machines, up to 500 A
The Lorch MicorMIG range is a set of inverter MIG/MAG welders with synergic control for steel, stainless steel and aluminium. Four models rated at 300, 350, 400 and 500 A can be upgraded to pulse and Speed processes without replacing the machine.
- Brand
- Lorch
- Country of manufacture
- Germany
- Models
- MicorMIG 300 / 350 / 400 / 500
- Processes
- MIG/MAG, TIG, MMA
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
What sets the MicorMIG line apart is its electronics. The control panel is modular and fully digital, so a standard MicorMIG can be turned into a MicorMIG Pulse within seconds, which gives a pulsed arc that produces almost no spatter, even in the transition zone. New processes, programmes and functions are loaded from NFC cards without calling a service engineer, and the same cards set access rights: they can limit parameter changes, block access to the machine, or lock it once a shift has ended.
The range consists of four models, MicorMIG 300, MicorMIG 350, MicorMIG 400 and MicorMIG 500, with welding currents of 25-300 A, 25-350 A, 30-400 A and 30-500 A. At 40 °C and a 60% duty cycle they carry 250 A, 300 A, 370 A and 430 A respectively. The 300 and 350 models feed steel wire from 0.6 to 1.2 mm, while the 400 and 500 take steel wire up to 1.6 mm. Power comes from a three-phase 400 V supply.
Beyond MIG/MAG, the machines also cover TIG and manual metal arc welding. The synergic programmes keep setup short: the welder chooses the material, wire and gas, then the process and the two-step or four-step mode, and the machine sets the remaining parameters itself. Two control panels are offered, BasicPlus for a straightforward start and ControlPro, which adds a graphic display and job memory.
For flux-cored wire, Lorch offers the SpeedArc, SpeedArc XT and SpeedUp packages. SpeedArc narrows the arc and pushes more force into the root, so a 1.6 mm rutile flux-cored wire can achieve root penetration without a change of wire, and 4 to 8 mm plate can be welded with a spray arc without overheating. SpeedUp combines hot and cold phases for vertical seams with lower heat input. According to the manufacturer, welding with these packages can be up to 30% faster.
The MicorMIG suits production where a single machine has to cover steel, stainless steel and aluminium, and where operators come with differing levels of experience.
Technical specifications
| Brand | Lorch |
|---|---|
| Country of manufacture | Germany |
| Models | MicorMIG 300 / 350 / 400 / 500 |
| Processes | MIG/MAG, TIG, MMA |
| Welding current range | 25-300 / 25-350 / 30-400 / 30-500 A |
| Duty cycle 60% at 40 °C | 250 / 300 / 370 / 430 A |
| Steel wire | 0.6–1.2 / 0.6–1.2 / 0.6–1.6 / 0.6–1.6 mm |
| Materials | steel, stainless steel, aluminium |
| Mains voltage | 400 V, 3~ |
| Control panels | BasicPlus, ControlPro |
| Upgrades | NFC cards, upgrade to MicorMIG Pulse |
| Standard | EN 60974-01 |
| Protection class (EN 60529) | IP23S |
| Insulation class | F |
| Marking | CE, S |
Part numbers
Show all part numbers (4)
MicorMIG 300, MicorMIG 350, MicorMIG 400, MicorMIG 500
Request a price and lead time
Lorch MicorMIG 300–500 inverter MIG/MAG welding machines, up to 500 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which MicorMIG model should I choose for 1.6 mm wire?
Steel wire up to 1.6 mm is fed by the MicorMIG 400 and MicorMIG 500, while the 300 and 350 models work with 0.6–1.2 mm wire.
Can pulse welding be added later?
Yes, a standard MicorMIG can be upgraded to MicorMIG Pulse, and the new processes and programmes are installed with NFC cards.
What is the duty cycle of the MicorMIG 500?
At 40 °C the MicorMIG 500 carries 430 A at a 60% duty cycle, with a welding range of 30-500 A.
Similar equipment from other manufacturers






