
Kühtreiber KITin 2040 MIG single-phase MIG/MAG inverter with MB 15 AG torch, 10 to 170 A
The Kühtreiber KITin 2040 MIG is a small single-phase inverter for MIG/MAG welding, supplied with the MB 15 AG torch and work lead already attached. It runs from a 1×230 V mains supply as well as from a generator, which suits construction sites, vehicle body work and garage workshops.
- Brand
- Kühtreiber
- Type
- MIG/MAG semi-automatic inverter
- Supply voltage 50/60 Hz
- 1× 230 V ± 15 %
- Slow-blow fuse
- 16 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The KITin 2040 MIG from Kühtreiber is a lightweight inverter for semi-automatic welding with solid or flux-cored wire under protective gas. The MB 15 AG torch and work lead are permanently attached and come as standard, so after unpacking only a gas cylinder, a regulator and a wire spool are needed. This sets it apart from the KITin 2040 MIG Euro, where the torch is fitted separately through a EURO connector.
Power comes from a single-phase 1× 230 V ± 15%, 50/60 Hz supply, with a 16 A slow-blow fuse on the mains. At 60% duty the unit draws 12 A and 4.6 kVA from the network. The manufacturer allows operation from a generator, which is why the machine is often taken to building sites and to places without a stable mains supply.
Welding current in CO2 is adjustable from 10 to 150 A, and in an Ar+CO2 mix from 20 to 170 A. Duty cycle is rated at 150 A for 35%, 120 A for 60% and 100 A for 100%. Open-circuit voltage is 22 to 31 V, the enclosure carries an IP 23 S rating, and thermal protection guards the unit against overheating.
Two controls handle the setup. One sets the welding voltage and wire feed speed together to suit the metal thickness, while the second trims the voltage finely and so governs the arc length. Wire feed runs from 1 to 11 m/min. A spool of up to 200 mm diameter fits inside the housing, and wire of 0.6 to 0.8 mm can be used, including flux-cored types.
The unit measures 470 × 200 × 310 mm and weighs 14 kg with the torch fitted. The manufacturer points to low power draw at high output, good welding properties, a sturdy build and high duty cycle figures. It suits body repair, vehicle servicing and fabrication in thin and medium steel.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Type | MIG/MAG semi-automatic inverter |
| Supply voltage 50/60 Hz | 1× 230 V ± 15 % |
| Slow-blow fuse | 16 A |
| Welding current range | 10 – 150 (CO2), 20 – 170 (Ar+CO2) |
| Duty cycle 35 % | 150 A |
| Duty cycle 60 % | 120 A |
| Duty cycle 100 % | 100 A |
| Mains current / power (60 %) | 12 A / 4.6 kVA |
| Open-circuit voltage | 22 – 31 V |
| Protection rating | IP 23 S |
| Torch cable connection | permanent |
| Torch | MB 15 AG (included) |
| Wire feed speed | 1 – 11 m/min |
| Wire diameter | Ø 0.6 – 0.8 mm |
| Spool | Ø up to 200 mm |
| Dimensions | 470 × 200 × 310 mm |
| Weight | 14 kg |
Part numbers
Show all part numbers (1)
51064
Request a price and lead time
Kühtreiber KITin 2040 MIG single-phase MIG/MAG inverter with MB 15 AG torch, 10 to 170 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Is the torch included with the KITin 2040 MIG?
Yes, the MB 15 AG torch and work lead are permanently attached. For a removable torch there is the KITin 2040 MIG Euro version, which has a EURO connector.
What duty cycle applies at 120 A?
The manufacturer gives 120 A at 60% duty, 150 A at 35% and 100 A at 100%.
Can flux-cored wire be used?
Yes, the manufacturer allows flux-cored wire of 0.6 to 0.8 mm. Solid wire is welded in CO2 or an Ar+CO2 mix.
Similar equipment from other manufacturers






