
Kühtreiber KITin 2040 MIG Euro single-phase MIG/MAG inverter, 20 to 170 A
The Kühtreiber KITin 2040 MIG Euro is a small, light single-phase inverter for MIG/MAG welding with a EURO connector for the torch. It runs from a 1× 230 V mains supply as well as from a generator, which suits construction sites, repair crews and small workshops.
- Brand
- Kühtreiber
- Type
- MIG/MAG semi-automatic inverter
- Supply voltage 50/60 Hz
- 1×230 V ±10%
- Slow-blow fuse
- 16 A
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Built by the Czech manufacturer Kühtreiber, the KITin 2040 MIG Euro is a compact inverter for MIG/MAG welding under protective gas. It runs on a single-phase supply and can also be powered from a generator, so it is well suited to construction sites and jobs away from a fixed mains connection.
Power input is 1×230 V ±10%, 50/60 Hz, protected by a 16 A slow-blow fuse. At 60% duty the unit draws 12 A and 4.6 kVA from the network. Welding current covers 20 to 150 A with CO2 and 20 to 170 A with an Ar+CO2 mixture, and the duty cycle is rated at 150 A for 35%, 120 A for 60% and 100 A for 100%. No-load voltage stays between 22 and 31 V.
Two controls make setup straightforward. One sets the welding voltage and wire feed speed together to match the thickness of the metal, and the other trims the voltage, which in turn adjusts the arc length. Wire feed speed runs from 1 to 11 m/min, so the right setting can be found quickly without consulting long charts.
The machine takes solid wire as well as flux-cored wire in diameters of 0.6 to 0.8 mm. A spool up to 200 mm in diameter fits inside the housing. The welding cable and torch connect through a EURO connector, so a torch with a matching EURO fitting and the length you need can be used.
Dimensions are 470 × 200 × 310 mm and the weight is 13 kg, so the unit is easy to carry around a workshop or stow in a van. The manufacturer highlights low power consumption at high output, sound welding properties and strong duty cycle figures for its class.
Technical specifications
| Brand | Kühtreiber |
|---|---|
| Type | MIG/MAG semi-automatic inverter |
| Supply voltage 50/60 Hz | 1×230 V ±10% |
| Slow-blow fuse | 16 A |
| Welding current range | 20 – 150 A (CO2), 20 – 170 A (Ar+CO2) |
| Duty cycle 35 % | 150 A |
| Duty cycle 60 % | 120 A |
| Duty cycle 100 % | 100 A |
| Mains current / power (60 %) | 12 A / 4.6 kVA |
| Open-circuit voltage | 22 – 31 V |
| Protection rating | IP 23 S |
| Torch cable connection | EURO connector |
| Wire feed speed | 1 – 11 m/min |
| Wire diameter | Ø 0.6 – 0.8 mm |
| Spool | Ø up to 200 mm |
| Dimensions | 470 × 200 × 310 mm |
| Weight | 13 kg |
Part numbers
Show all part numbers (1)
51147
Request a price and lead time
Kühtreiber KITin 2040 MIG Euro single-phase MIG/MAG inverter, 20 to 170 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can the KITin 2040 MIG Euro run from a generator?
Yes, the manufacturer states that it can run from a generator, for example on a construction site. A 16 A slow-blow fuse is required on the supply.
What current can it hold over longer runs?
Duty cycle is 100% at 100 A, 60% at 120 A and 35% at 150 A. The maximum in an Ar+CO2 mix is 170 A.
Which wire and torch are suitable?
Solid or flux-cored wire of 0.6 to 0.8 mm on a spool up to 200 mm. The torch connects through a EURO connector.
Similar equipment from other manufacturers






