International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Svarog 350 iQ SDpulse modular WM MIG/MAG welder 350 A, water cooled, no case

ALFA IN Svarog 350 iQ SDpulse modular WM is a modular pulsed inverter rated at 350 A for MIG/MAG and MMA welding, supplied with a modular chassis for one gas cylinder and a liquid-cooled torch, but without a storage case. It suits steel and aluminium structures in workshops, on repair jobs and on site visits.

Brand
ALFA IN
Country of manufacture
Czech Republic
Series
Svarog 350 iQ SDpulse modular
Version
WM

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The WM variant combines the power source, a liquid cooling unit for the torch and a modular chassis for a single gas cylinder, but it has no storage case. Compared with the WBM the only thing missing is the case, while compared with the WS the chassis is the difference: here it is modular, whereas the WS carries a small fixed one. The welding section of the ALFA IN unit stays the same, giving 350 A, pulsed MIG/MAG and manual arc welding.

MIG/MAG on this source offers three control modes, manual, synergic and pulsed, so one machine covers both simple and demanding joints. The shielding gas can be a mixture or CO2, and the manufacturer reports good welding behaviour with either. Wire of 0.8 mm or 1.0-1.2 mm diameter suits carbon and alloy steels and aluminium alloys. Soldering of galvanised steel and flux-cored wire are mentioned too, and the polarity has to be changed before flux-cored wire is used.

MMA is part of the base version, so the machine welds with electrodes up to Ø 4.0 mm and holds the settings it was given. Smooth voltage adjustment is complemented by pre-flow, post-flow, burn-back and starting wire speed settings. Together with the JOB memory on the LED panel these make it quick to return to tested settings on repeat parts. The manual also describes preparing the unit for air-arc gouging (AIR) with a separate gouging torch.

The feeder has four drive rolls, the circuit has an electronic choke, and the fan works in an eco cooling mode. There is a light inside the wire compartment and a single braked wheel at the front. Control is fully processor-based, and some machine characteristics are altered by replacing the software, which the user can update from a USB stick depending on the panel type.

The series follows a modular concept: the power source separates quickly from the chassis and, where fitted, from the torch cooling unit. On its own it weighs only 31.7 kg, which suits field work. The machines are built in the Czech Republic, with electronics, software and mechanics developed by ALFA IN's own department. They are used by metal shops for light and heavy structures, in repair and service workshops, in industrial equipment production and in training schools. For liquid-cooled versions the manual covers the water torch cooling system, air bleeding from the circuit and testing the cooling unit; the manufacturer offers ARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m and ARC M6OSW 4m torches for it.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
SeriesSvarog 350 iQ SDpulse modular
VersionWM
Typepulsed MIG/MAG inverter
Welding current350 A
ProcessesMIG/MAG (manual, synergic, pulsed), MMA
Gasmixed gas, CO2
Wire diameter0.8 mm; 1.0-1.2 mm
MMA electrodesup to Ø 4.0 mm
Wire feed4-roll
Chokeelectronic
Torch coolingliquid (cooling unit included)
Chassismodular chassis for one gas cylinder
Storage caseno
Source weight31.7 kg
Torches to orderARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m, ARC M6OSW 4m

Part numbers

Show all part numbers (1)

E.550WM

Request a price and lead time

ALFA IN Svarog 350 iQ SDpulse modular WM MIG/MAG welder 350 A, water cooled, no case. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which torches suit the WM version?

The WM has a liquid cooling unit, so the manufacturer offers water-cooled torches for it: ARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m and ARC M6OSW 4m.

Which gas does the WM run on?

Both a gas mixture and CO2. The manufacturer notes good welding properties with either.

Which wire can it weld with?

Wire of 0.8 mm and 1.0-1.2 mm diameter for carbon and alloy steels and aluminium alloys, plus flux-cored wire once the polarity is changed.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides