International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Svarog 350 iQ SDpulse modular WBM MIG/MAG welder 350 A, water cooled, modular chassis

ALFA IN Svarog 350 iQ SDpulse modular WBM is a modular pulsed inverter rated at 350 A for MIG/MAG and MMA welding, supplied with a modular chassis for one gas cylinder, a storage case and a liquid-cooled torch. It suits steel and aluminium structures in workshops, on repair jobs and on site visits.

Brand
ALFA IN
Country of manufacture
Czech Republic
Series
Svarog 350 iQ SDpulse modular
Version
WBM

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The WBM build combines the power source with a liquid cooling unit for the torch, a storage case and a modular chassis for a single gas cylinder. Compared with the WBL the chassis is modular rather than fixed, and compared with the WM the storage case is included. The 350 A ALFA IN source is identical across the range, offering MIG/MAG in manual, synergic and pulsed modes as well as MMA.

The operator switches between manual, synergic and pulsed MIG/MAG from the front panel. The manufacturer reports good welding behaviour in both mixed gas and CO2, and wire of 0.8 mm or 1.0-1.2 mm diameter can be used on carbon and alloy steels and on aluminium alloys. Soldering of galvanised metal and flux-cored wire are supported as well, with the polarity set to suit the latter.

Without any extra modules the machine also runs as an MMA welder with electrodes up to Ø 4.0 mm, and the set parameters can be stored. Voltage is adjusted smoothly, and pre-flow, post-flow, burn-back and starting wire speed are all adjustable. The LED panel offers menus and JOB memories, along with service functions such as a gas test, wire threading, panel lock and reset. According to the manual, the unit can also be prepared for air-arc gouging (AIR) using a separate gouging torch.

Wire is fed by a four-roll mechanism, inductance is set by an electronic choke, and the power source fan runs in an eco cooling mode. The feed compartment is lit, and there is one braked wheel at the front. The processor-based control can take new firmware to change the machine's characteristics, and depending on the panel type the update can be loaded from a USB stick without a service visit.

The range follows a modular concept: the power source can be detached from the chassis and, where fitted, from the liquid cooling unit. Without the chassis it weighs 31.7 kg, so only a compact 350 A block needs to travel for installation or repair in the field. ALFA IN builds these machines in the Czech Republic and designs the control electronics, software and mechanical parts in-house. They serve metal fabrication shops working on light and heavy structures, repair and automotive workshops, industrial equipment manufacturers and welder training centres. For liquid-cooled versions the manual covers the water torch cooling system, bleeding air from the circuit and testing the cooling unit; the manufacturer offers ARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m and ARC M6OSW 4m torches for these.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
SeriesSvarog 350 iQ SDpulse modular
VersionWBM
Typepulsed MIG/MAG inverter
Welding current350 A
ProcessesMIG/MAG (manual, synergic, pulsed), MMA
Gasmixed gas, CO2
Wire diameter0.8 mm; 1.0-1.2 mm
MMA electrodesup to Ø 4.0 mm
Wire feed4-roll
Chokeelectronic
Torch coolingliquid (cooling unit included)
Chassismodular chassis for one gas cylinder
Storage caseyes
Source weight31.7 kg
Torches to orderARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m, ARC M6OSW 4m

Part numbers

Show all part numbers (1)

E.550WBM

Request a price and lead time

ALFA IN Svarog 350 iQ SDpulse modular WBM MIG/MAG welder 350 A, water cooled, modular chassis. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which torches suit the WBM version?

This build has a liquid cooling unit, so the manufacturer offers water-cooled torches for it: ARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m and ARC M6OSW 4m.

How much does the power source weigh without the chassis?

The 350 A power source on its own weighs 31.7 kg, and it is detached from the chassis for field work.

Which shielding gas does the machine run on?

Both a gas mixture and CO2. The manufacturer reports good welding properties with either one.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides