International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Svarog 350 iQ SDpulse modular WBL MIG/MAG welder, 350 A, water-cooled

The WBL configuration of the modular Svarog 350 iQ SDpulse from ALFA IN is a 350 A pulsed MIG/MAG and MMA inverter with liquid cooling for the torch, a fixed trolley for one gas cylinder and a storage box. It suits steel and aluminium structures in workshops, on repair jobs and at off-site work.

Brand
ALFA IN
Country of manufacture
Czech Republic
Series
Svarog 350 iQ SDpulse modular
Configuration
WBL

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The WBL configuration, article E.550WBL, brings together three things: a liquid cooling unit for the torch, a storage box and a fixed trolley for one gas cylinder. Among the liquid-cooled versions, the WBL differs from the WBM by its trolley type, which here is fixed rather than modular, and from the WBS by a trolley sized for the cylinder. The welding source is the same as in the other configurations, made in the Czech Republic with control electronics, software and mechanics developed by ALFA IN: 350 A, MIG/MAG with pulse and MMA.

For MIG/MAG the source offers three control modes, manual, synergic and pulse, so one machine covers both simple and demanding welds. The manufacturer notes good welding properties in mixed gas as well as in CO2. Wire of 0.8 mm or 1.0 to 1.2 mm handles carbon and alloy steels and aluminium alloys. The list of jobs also includes brazing galvanised steel and welding with flux-cored wire, which needs the polarity changed.

MMA is part of the base version: the unit welds with electrodes up to 4.0 mm and stores the set parameters. Voltage is adjusted smoothly, and the operator sets gas purge before and after welding, burn-back and initial wire speed. Control runs from an LED panel with menus and JOBs, and service functions include a gas test, wire threading, panel lock and reset. According to the manual, the machine can also be set up for air-arc gouging (AIR) with a separate gouging torch.

The design has a four-roller wire feed, an electronic choke and an eco cooling mode. The feed compartment is lit inside, and the front wheel has a brake. The unit is processor-controlled, and new software extends its functions; depending on the panel it can be loaded from a USB stick without a service visit. The source detaches quickly from the trolley and, where fitted, from the torch cooling unit. Alone it weighs 31.7 kg, so only a compact 350 A unit goes out for on-site installation or repair. The manual describes the cooling circuit, air bleeding and cooling unit test, and the manufacturer offers ARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m and ARC M6OSW 4m water-cooled torches for it.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
SeriesSvarog 350 iQ SDpulse modular
ConfigurationWBL
Typepulsed MIG/MAG inverter
Welding current350 A
ProcessesMIG/MAG (manual, synergic, pulse), MMA
Shielding gasmixed gas, CO2
Wire diameter0.8 mm; 1.0 – 1.2 mm
MMA electrodesup to Ø 4.0 mm
Wire feed4-roller
Chokeelectronic
Torch coolingliquid (cooling unit included)
Trolleyfixed trolley for one gas cylinder
Storage boxyes
Power source weight31.7 kg
Torches to orderARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m, ARC M6OSW 4m

Part numbers

Show all part numbers (1)

E.550WBL

Request a price and lead time

ALFA IN Svarog 350 iQ SDpulse modular WBL MIG/MAG welder, 350 A, water-cooled. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which torches suit the Svarog 350 iQ SDpulse modular WBL?

The configuration has a liquid cooling unit, so the manufacturer offers water-cooled torches for it: ARC M6W 3m DIGIMIG, ARC M6W 4m, ARC M6W 4m DIGIMIG PISTOL, ARC M6OSW 3m and ARC M6OSW 4m.

What wire can it weld with?

Wire of 0.8 mm or 1.0 to 1.2 mm diameter on carbon and alloy steels and aluminium alloys, and flux-cored wire after the polarity is changed.

Can it weld with MMA electrodes?

Yes. MMA is part of the base kit, with electrodes up to Ø 4.0 mm, and the set parameters are kept in memory.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides