International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Svarog 350 iQ SDpulse modular BS MIG/MAG welder 350 A, with case, small chassis

ALFA IN Svarog 350 iQ SDpulse modular BS is a modular pulsed inverter rated at 350 A for MIG/MAG and MMA welding in the BS version, which comes with a small chassis, a storage case and a gas-cooled torch. It suits steel and aluminium structures in workshops, on repair jobs and on site visits.

Brand
ALFA IN
Country of manufacture
Czech Republic
Series
Svarog 350 iQ SDpulse modular
Version
BS

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The BS build ships with a storage case and a small chassis, and it runs without a liquid cooling unit. Against the WBS, the difference is the gas-cooled torch, while the chassis size sets it apart from the BL and BM, where the chassis is larger. The manufacturer lists ARC M22 torches in 3m, 4m and 5m lengths (250/220/145A) for it, and the power source delivers the same 350 A as the other versions.

MIG/MAG is switched between manual, synergic and pulsed modes from the control panel, depending on the metal and the joint position. Shielding gas can be a mixture or CO2, and the manufacturer reports good welding properties with either. Wire of 0.8 mm or 1.0-1.2 mm diameter suits carbon and alloy steels, aluminium alloys and other metals. The manual also covers soldering of galvanised steel and flux-cored wire, for which the polarity has to be changed.

MMA is included in the base kit, with electrodes up to Ø 4.0 mm, and the settings can be stored. Voltage is adjusted smoothly, and the operator sets gas pre-flow and post-flow, burn-back and starting wire speed. Proven settings go into JOB memory, and the LED menu offers a gas test, wire threading, quick panel lock and reset. According to the instructions, the machine can be prepared for air-arc gouging (AIR) with a separate gouging torch.

Wire is fed by a four-roll drive, the circuit includes an electronic choke, and the fan runs in an eco cooling mode. The feed compartment has an internal light, and the front wheel is braked. Control is fully processor-based: the characteristics change with new firmware, which the owner installs from a USB stick depending on the control type.

The modular design means the power source can be detached from the chassis and, if fitted, from the torch cooling unit. The source alone weighs 31.7 kg, so for field work it is the compact 350 A block that travels. These machines are made in the Czech Republic, with electronics, software and mechanics developed by ALFA IN's own department. Typical users are metal shops for light and heavy structures, service and car repair workshops, industrial equipment production and training schools. Without the water circuit the unit is simpler to service.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
SeriesSvarog 350 iQ SDpulse modular
VersionBS
Typepulsed MIG/MAG inverter
Welding current350 A
ProcessesMIG/MAG (manual, synergic, pulsed), MMA
Gasmixed gas, CO2
Wire diameter0.8 mm; 1.0-1.2 mm
MMA electrodesup to Ø 4.0 mm
Wire feed4-roll
Chokeelectronic
Torch coolinggas, no liquid cooling unit
Chassissmall chassis
Storage caseyes
Source weight31.7 kg
Torches to orderARC M22 3m, ARC M22 4m, ARC M22 5m (250/220/145A)

Part numbers

Show all part numbers (1)

E.550BS

Request a price and lead time

ALFA IN Svarog 350 iQ SDpulse modular BS MIG/MAG welder 350 A, with case, small chassis. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the BS version have a liquid cooling unit for the torch?

No. The BS is built without a liquid cooling unit, and for it the manufacturer offers ARC M22 torches in 3m, 4m and 5m lengths (250/220/145A).

Which wire can it weld with?

Wire of 0.8 mm and 1.0-1.2 mm diameter from carbon and alloy steels and aluminium alloys, and flux-cored wire after the polarity is changed.

Can it weld with MMA electrodes?

Yes. MMA is part of the base kit, with electrodes up to Ø 4.0 mm, and the settings can be stored.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides