
ALFA IN Svarog 350 iQ SDpulse modular BM MIG/MAG welder 350 A, with case, modular chassis
ALFA IN Svarog 350 iQ SDpulse modular BM is a modular pulsed inverter rated at 350 A for MIG/MAG and MMA welding, supplied with a large modular chassis for a gas cylinder, a storage case and a gas-cooled torch. It suits steel and aluminium structures in workshops, on repair jobs and on site visits.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Series
- Svarog 350 iQ SDpulse modular
- Version
- BM
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The BM build comes with a storage case and a large modular chassis for a gas cylinder, and it has no liquid cooling unit. Compared with the WBM it is set apart by its gas-cooled torch, while compared with the M it includes the case. The manufacturer lists ARC M22 torches in 3m, 4m and 5m lengths (250/220/145A) for it, and the power source is the same 350 A ALFA IN unit.
In MIG/MAG mode the welder selects manual settings, a synergic programme or a pulsed process, depending on the metal and the joint position. Shielding gas can be a mixture or CO2, and the manufacturer reports good welding behaviour with either. Wire of Ø 0.8 mm or 1.0-1.2 mm suits carbon and alloy steels and aluminium alloys. Soldering of galvanised metal and flux-cored wire are also supported, with the polarity set to suit the latter.
Without add-on modules the machine also works as an MMA welder with electrodes up to Ø 4.0 mm, and the settings it uses are saved. Voltage is adjusted smoothly, and the operator sets pre-flow, post-flow, burn-back and starting wire speed. Proven settings are stored as JOBs, while the LED menu gives access to a gas test, wire threading, a quick panel lock and a reset. According to the instructions, the unit can also be prepared for air-arc gouging (AIR) with a separate gouging torch.
The feeder is a four-roll mechanism, the circuit includes an electronic choke, and the fan runs in an eco cooling mode. A light inside the wire compartment makes coil loading easier, and the front wheel has a brake. Processor control means that new software can change the machine's characteristics, and depending on the panel the update can be loaded from a USB stick without a service visit.
Under the modular layout the power source comes off the chassis and, where fitted, is disconnected from the torch cooling unit. On its own it weighs 31.7 kg, which makes it handy for field work where a compact 350 A unit is needed. ALFA IN makes these machines in the Czech Republic and develops the control electronics, software and mechanical assemblies in-house. They serve metal fabrication shops working on light and heavy structures, repair and automotive workshops, industrial equipment production and welder training. Without a water circuit the unit is simpler to maintain.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Series | Svarog 350 iQ SDpulse modular |
| Version | BM |
| Type | pulsed MIG/MAG inverter |
| Welding current | 350 A |
| Processes | MIG/MAG (manual, synergic, pulsed), MMA |
| Gas | mixed gas, CO2 |
| Wire diameter | 0.8 mm; 1.0-1.2 mm |
| MMA electrodes | up to Ø 4.0 mm |
| Wire feed | 4-roll |
| Choke | electronic |
| Torch cooling | gas, no liquid cooling unit |
| Chassis | large modular chassis for a gas cylinder |
| Storage case | yes |
| Source weight | 31.7 kg |
| Torches to order | ARC M22 3m, ARC M22 4m, ARC M22 5m (250/220/145A) |
Part numbers
Show all part numbers (1)
E.550BM
Request a price and lead time
ALFA IN Svarog 350 iQ SDpulse modular BM MIG/MAG welder 350 A, with case, modular chassis. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Does the BM version have a liquid cooling unit for the torch?
No, the BM is built without a liquid cooling unit. For it the manufacturer offers gas-cooled ARC M22 torches in 3m, 4m and 5m lengths (250/220/145A).
Which wire can it weld with?
Wire of 0.8 mm and 1.0-1.2 mm diameter from carbon and alloy steels and aluminium alloys, plus flux-cored wire once the polarity is changed.
Can it weld with MMA electrodes?
Yes. MMA is part of the base kit, with electrodes up to Ø 4.0 mm, and the settings are kept in memory.
Similar equipment from other manufacturers






