International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN Svarog 350 iQ SDpulse modular BL MIG/MAG welder 350 A, with case, no liquid cooling

ALFA IN Svarog 350 iQ SDpulse modular BL is a modular pulsed inverter rated at 350 A for MIG/MAG and MMA welding, supplied in the BL version with a stationary chassis for a large gas cylinder, a storage case and a gas-cooled torch. It suits steel and aluminium structures in workshops, on repair jobs and on site visits.

Brand
ALFA IN
Country of manufacture
Czech Republic
Series
Svarog 350 iQ SDpulse modular
Version
BL

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The BL variant ships with a storage case and a stationary chassis that carries a large gas cylinder. There is no liquid cooling unit in this build, so the torch relies on gas cooling, and the manufacturer lists suitable torches for it. Compared with the WBL, the BL simply lacks the water circuit, while both carry the same 350 A ALFA IN power source.

In MIG/MAG mode the welder picks manual settings, a synergic programme or a pulsed process, depending on the metal and the joint position. The manufacturer reports good welding properties in both mixed gas and CO2, and wire of 0.8 mm or 1.0-1.2 mm diameter can be run on carbon and alloy steels as well as aluminium alloys. Soldering of galvanised steel and flux-cored wire are also covered, though the polarity must be switched before flux-cored wire is used.

Without any add-on modules the unit also works as an MMA welder, with electrodes up to Ø 4.0 mm, and it keeps the settings in memory. Voltage is adjusted smoothly, while the operator sets the gas pre-flow and post-flow, the burn-back and the starting wire speed. Those values, together with the JOB memory on the LED panel, let a welder return quickly to proven settings for repeat parts. According to the instructions, the machine can also be prepared for air-arc gouging (AIR) with a separate gouging torch.

Wire is fed by a four-roll drive, the circuit includes an electronic choke, and the fan runs in an eco cooling mode. Light is fitted inside the feed compartment, and a single braked wheel sits at the front. Processor control lets new firmware change the machine's characteristics, and depending on the control type the owner can perform the update from a USB stick.

Under the modular layout, the power source comes off the chassis and, where fitted, is disconnected from the torch cooling unit. Without the chassis it weighs 31.7 kg, so only a compact 350 A block needs to travel for installation or field repair. The series is made in the Czech Republic, with electronics, software and mechanics developed by ALFA IN's own department. Typical users include metal fabricators working on light and heavy structures, service and car workshops, industrial equipment makers and training establishments. Without the water circuit the unit is simpler to maintain.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
SeriesSvarog 350 iQ SDpulse modular
VersionBL
Typepulsed MIG/MAG inverter
Welding current350 A
ProcessesMIG/MAG (manual, synergic, pulsed), MMA
Gasmixed gas, CO2
Wire diameter0.8 mm; 1.0-1.2 mm
MMA electrodesup to Ø 4.0 mm
Wire feed4-roll
Chokeelectronic
Torch coolinggas cooling, no liquid cooling unit
Chassisstationary chassis for a large gas cylinder
Storage caseyes
Source weight31.7 kg
Torches to orderARC M22 3m, ARC M22 4m, ARC M22 5m (250/220/145A)

Part numbers

Show all part numbers (1)

E.550BL

Request a price and lead time

ALFA IN Svarog 350 iQ SDpulse modular BL MIG/MAG welder 350 A, with case, no liquid cooling. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the BL version have a liquid cooling unit for the torch?

No. The BL has no liquid cooling unit, and the manufacturer offers ARC M22 torches in 3m, 4m and 5m lengths (250/220/145A) for it.

Can it weld with MMA electrodes?

Yes. MMA mode is part of the standard equipment, with electrodes up to Ø 4.0 mm, and the settings are stored in memory.

How much does the power source weigh without the chassis?

The 350 A power source on its own weighs 31.7 kg, and it is detached from the chassis for work on site.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides