International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 500 IN PULSE COMPACT H2O Pulsed MIG/MAG Inverter, 500 A, Water Cooled

The compact ALFA IN aXe 500 IN PULSE COMPACT H2O is a pulsed synergic inverter for MIG/MAG and MMA welding and air-arc gouging, with the torch water cooling unit built into the same housing. It gives 500 A at 60% duty cycle and 400 A at 100%, with memory for 99 jobs.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 500 IN PULSE COMPACT H2O
Processes
MIG/MAG (pulsed), MMA, gouging

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The COMPACT H2O build of the aXe 500 IN PULSE series from the Czech maker ALFA IN combines the power source and a water cooling unit for the torch in one housing. The manufacturer also offers this model in other versions, with a detachable wire feed unit or without water cooling. The compact liquid-cooled version suits a fixed welding station where water-cooled torches are used at high currents and no separate feeder is needed. The machine comes fully equipped, with a 99-job module, an MMA module and an ARC M torch with wear-resistant consumables.

The power reserve is generous: 500 A at 60% duty cycle and 400 A at 100%. It is a pulsed synergic inverter for MIG/MAG welding, manual arc welding with coated electrodes and air-arc gouging. Coated electrodes up to 5.0 mm in diameter can be welded, and the manufacturer notes good arc characteristics for both electrode welding and gouging.

In MIG/MAG mode the operator can work in full synergy, where the machine selects settings for the wire and gas, or set everything by hand. Synergic programmes cover Fe, Cr/Ni, AlSi and AlMg materials, wire of 0.8, 1.0 and 1.2 mm and several gas mixes. The inverter keeps a steady output at low mains consumption, so the electricity draw is smaller.

Repeat welds are easier with stored jobs. Five jobs are saved with a long press and recalled with a short press, each of the five has its own button on the panel, and the software holds up to 99 jobs. Direct access to five current values is provided. UD torches are supported: from the handle the welder changes output, calls up programmes and modes, locks the panel and uses the Up/Down function. The four-roller feed has large rollers and an incremental sensor, so the wire runs evenly without slipping. The unit meets CE marking requirements, and the manual calls for a safety check of the source to ČSN EN 60 974-1.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 500 IN PULSE COMPACT H2O
ProcessesMIG/MAG (pulsed), MMA, gouging
Welding current at 60% duty cycle500 A
Welding current at 100% duty cycle400 A
Wire diameter0.8; 1.0; 1.2 mm
MMA electrode diameterup to 5.0 mm
Synergy materialsFe, Cr/Ni, AlSi, AlMg
Controlsfull synergy or manual mode
Job memory99 jobs, 5 on separate buttons
Wire feedfour-roller, large rollers, incremental sensor
Coolingwater (H2O)
Buildcompact

Part numbers

Show all part numbers (1)

E.137H

Request a price and lead time

ALFA IN aXe 500 IN PULSE COMPACT H2O Pulsed MIG/MAG Inverter, 500 A, Water Cooled. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What current does the aXe 500 IN PULSE COMPACT H2O deliver?

500 A at 60% duty cycle and 400 A at 100%.

Which wire and materials do the synergic programmes cover?

Programmes are set for 0.8, 1.0 and 1.2 mm wire on Fe, Cr/Ni, AlSi and AlMg materials, with various gas mixes.

Can it weld with electrodes and gouge?

Yes, the MMA module is in the standard fit, the machine welds coated electrodes up to 5.0 mm, and it is suitable for air-arc gouging.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides