International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 500 IN GENERATOR H2O MIG/MAG and MMA power source, 500 A

The ALFA IN aXe 500 IN GENERATOR H2O is a standalone power source for semi-automatic MIG/MAG welding, manual metal arc welding and arc gouging. It runs from a 400 V supply, delivers 500 A at a 60% duty cycle and 420 A at 100%, and is available with a water-cooled torch circuit.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 500 IN GENERATOR H2O
Type
synergic inverter, standalone generator

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

This version of the aXe 500 IN is supplied as a separate generator. The wire feeder is not built into the cabinet. For MIG/MAG work, the generator is used with a detachable PS44 aXe 400, 500 IN H2O feeder with liquid cooling and a connecting cable. Cables for the water-cooled version come in 2, 5, 10 or 15 m lengths, so the feeder can be placed up to that distance from the generator within the workshop.

The generator comes fully equipped, with the 99-job programme module and the MMA module. Synergic control can be switched off, so the welder works in manual mode. Six stored current values can be recalled quickly. Gas pre-flow, post-flow, burn-back and the initial wire feed speed are set separately, and an electronic choke controls the arc during metal transfer. The voltage is adjusted smoothly.

In MMA mode the unit works well with coated electrodes up to 5.0 mm in diameter. Its 500 A capacity is enough for arc gouging, so the same machine can be used for back-gouging a root or removing defective sections of weld. Control supports 2T, 4T and stepped modes, a secondary parameters menu, saving and recalling programmes, and remote control. The MMA module has the part number aXe.IN.E and the 99-job module aXe.IN.9; in this version both are already fitted.

The welding current range is 40–500 A. The mains supply is three-phase 400 V with 32 A mains protection, and the generator weighs 84 kg. The H2O version has a water-cooled torch circuit with an economy cooling mode, and on request the unit can also be supplied without water cooling. The machine carries the CE marking and is intended for trained operators in workshops that weld thick plate at high currents.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 500 IN GENERATOR H2O
Typesynergic inverter, standalone generator
ProcessesMIG/MAG, MMA, arc gouging
Welding current range40–500 A
Current at 60% duty cycle500 A
Current at 100% duty cycle420 A
Mains voltage400 V
Mains protection32 A
Torch coolingwater (H2O)
Coated electrodesup to 5.0 mm
Programme memory99-job module
Wire feederseparate, PS44 aXe 400, 500 IN H2O
Weight84 kg (generator)

Part numbers

Show all part numbers (1)

E.065H

Request a price and lead time

ALFA IN aXe 500 IN GENERATOR H2O MIG/MAG and MMA power source, 500 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the generator be used without a separate feeder?

For MIG/MAG a detachable PS44 aXe 400, 500 IN H2O feeder and a connecting cable of 2, 5, 10 or 15 m are needed. MMA and arc gouging do not require a feeder.

What current does the unit deliver during continuous work?

At a 100% duty cycle the generator delivers 420 A, and at 60% it delivers 500 A, within an adjustment range of 40–500 A.

Which electrodes can be used in MMA mode?

Coated electrodes up to 5.0 mm in diameter. The MMA module is included in the kit, and at 500 A the unit also performs arc gouging.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides