International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 500 IN CRATER FILLER COMPACT-44 H2O MIG/MAG welder, 40-500 A

ALFA IN aXe 500 IN CRATER FILLER COMPACT-44 H2O is a compact welding inverter with a built-in wire feeder and water cooling, for MIG/MAG, MMA and arc gouging. Its simpler panel and crater filling function deliver 500 A at a 60% duty cycle.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 500 IN CRATER FILLER COMPACT-44 H2O
Type
manual control inverter, compact design

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The unit has a current range of 40 to 500 A. At 100% duty cycle it delivers 420 A and at 60% it reaches 500 A. It runs from a three-phase 400 V supply with 32 A mains protection. The compact H2O version combines the wire feeder and water torch cooling in one housing weighing 99.1 kg. A version with a separate feeder is also produced, for cases where the feeder must be placed away from the source.

Wire diameters from 0.8 to 1.2 mm are supported, and up to 1.6 mm with suitable fittings. The unit welds carbon and alloy steels and aluminium alloys, with butt joints, single-sided and double-sided joints, and corner and lap joints.

Compared with the synergic models, the panel is simpler and the welder sets wire feed speed and voltage by hand. The electronic choke sets the character of the arc, and voltage is adjusted smoothly. Gas purge before and after welding, burn-back and the initial wire feed speed can all be set, and the cooling system has an economy mode. The control panel supports 2T, 4T and step modes, a menu of secondary parameters, JOB programme storage and remote control.

Stick welding requires an optional MMA module, with which the unit handles coated electrodes up to 5.0 mm and performs arc gouging. ALFA IN aims this model at medium and large production with long duty cycles, where equipment is expected to be productive and simple to maintain. The unit carries the CE mark, and servicing and repair are carried out with original spare parts.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 500 IN CRATER FILLER COMPACT-44 H2O
Typemanual control inverter, compact design
ProcessesMIG/MAG, MMA (optional module), arc gouging
Welding current range40-500 A
Current at 60% duty cycle500 A
Current at 100% duty cycle420 A
Mains voltage400 V
Mains protection32 A
Wire diameter0.8-1.2 mm, up to 1.6 mm
MMA electrodesup to 5.0 mm
Torch coolingwater (H2O)
Wire feederbuilt-in
Weight99.1 kg

Part numbers

Show all part numbers (1)

E.104-44H

Request a price and lead time

ALFA IN aXe 500 IN CRATER FILLER COMPACT-44 H2O MIG/MAG welder, 40-500 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does CRATER FILLER differ from the synergic aXe 500 IN?

It has a simpler panel, manual control mode only and crater filling at the end of the weld. Quick access covers three current values.

Which wire can be used?

Wire from 0.8 to 1.2 mm, and up to 1.6 mm with suitable fittings, for carbon and alloy steels and aluminium alloys.

Can the unit weld with coated electrodes?

Yes, with the MMA module, which is ordered separately. It handles coated electrodes up to 5.0 mm and also does arc gouging.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides